|
344395413
|
0215800
|
2019-10-23
|
7629 ROUTES 5 & 20, BLOOMFIELD, NY, 14469
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2019-10-23
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2019-10-23
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1227576 |
| Safety |
Yes |
|
|
|
342311735
|
0215800
|
2017-05-08
|
7629 STATE ROUTES 5 AND 20, BLOOMFIELD, NY, 14469
|
|
| Inspection Type |
Referral
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
2017-06-08
|
| Emphasis |
L: HHHT50, N: LEAD
|
| Case Closed |
2019-10-29
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1246157 |
| Health |
Yes |
|
| Type |
Referral |
| Activity Nr |
1209698 |
| Health |
Yes |
|
| Type |
Inspection |
| Activity Nr |
1245094 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100095 K01 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
5986.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
2 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(k)(1): The employer did not train each employee who is exposed to noise at or above an 8-hour time-weighted average of 85 decibels in accordance with the requirements of 29 CFR 1910.95(k). The employer did not institute a training program and ensure employee participation in the program: a) Ammo department, on or about 5/15/17: Pellet room employees were exposed to a dose of 83.5 % or a noise level of 88.7 dBA, based on an 8 hour time weighted average, for the 267 minutes sampled. A zero exposure increment was included for the 213 minutes not sampled. Training on hearing conservation was not provided by the employer. b) Ammo department, on or about 5/15/17: A BB Line employee were exposed to a dose of 144.0 % or a noise level of 92.6 dBA, based on an 8 hour time weighted average, for the 315 minutes sampled. A zero exposure increment was included for the 165 minutes not sampled. Training on hearing conservation was not provided by the employer. Abatement certification must be submitted for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100095 K02 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
4 |
| Nr Exposed |
12 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(k)(2): The training program was not repeated annually for each employee included in the hearing conservation program. Information in the training program was not updated to be consistent with changes in protective equipment and work processes: a) Ammo department, on or about 5/15/17: Pellet room employees were exposed to noise at a dose of 83.5 % or a noise level of 88.7 dBA, based on an 8 hour time weighted average, for the 267 minutes sampled. A zero exposure increment was included for the 213 minutes not sampled. Annual training on hearing conservation was not provided by the employer. b) Ammo department, on or about 5/15/17: BB Line employees were exposed to noise at a dose of 144.0 % or a noise level of 92.6 dBA, based on an 8 hour time weighted average, for the 315 minutes sampled. A zero exposure increment was included for the 165 minutes not sampled. Annual training on hearing conservation was not provided by the employer. c) Ammo department, on or about 5/15/17: Redraw Operator was exposed to noise at a dose of 144.8 % or a noise level of 92.67 dBA, based on an 8 hour time weighted average, for the 350 minutes sampled. A zero exposure increment was included for the 130 minutes not sampled. Annual training on hearing conservation was not provided by the employer. d) Ammo department, on or about 5/15/17: A flasher operator was exposed to noise at a dose of 147.4 % or a noise level of 92.79 dBA, based on an 8 hour time weighted average, for the 288 minutes sampled. A zero exposure increment was included for the 192 minutes not sampled. Annual training on hearing conservation was not provided by the employer. Abatement certification must be submitted for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100124 F |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-30 |
| Current Penalty |
7060.0 |
| Initial Penalty |
10755.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
2 |
| Nr Exposed |
6 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.124(f): Employees were not knowledgeable of the proper first-aid procedures appropriate to the dipping or coating hazards to which they were exposed: a) Bluing line, on or about 5/25/17: Bluing line employees were not provided with first aid training appropriate for the hazards to which they are exposed including, but not limited to caustics such as sodium hydroxide; acids such as hydrochloric acid; and bluing chemicals. b) Plating line, on or about 5/25/17: Plating line employees were not provided with first aid training appropriate for the hazards to which they are exposed including, but not limited to caustics such as sodium hydroxide; acids such as hydrochloric acid and plating line chemicals such as those containing chromium it its various forms. Abatement certification must be submitted for this item. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100133 A01 |
| Issuance Date |
2017-10-13 |
| Current Penalty |
4911.0 |
| Initial Penalty |
7171.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) Bluing tank area, on or about 5/15/17: Employees exposed to splash hazard from moving parts in and out of bluing tanks containing muriatic acid and sodium hydroxide did not wear splash goggles to protect against corrosive liquid contacting the eyes. |
|
| Citation ID |
01004A |
| Citaton Type |
Other |
| Standard Cited |
19100146 C04 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-19 |
| Current Penalty |
8963.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
2 |
| Nr Exposed |
4 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.146(c)(4): When the employer decided that its employees would enter permit spaces, the employer did not develop and implement a written permit space entry program that complied with 29 CFR 1910.146: a) Fire pit, on or about the week of 5/7/17: A permit required confined space program was not implemented for employees entering the fire pit, a permit required confined space, to inspect pumps. Employees entered the pit without taking precautions required for entering a permit space including, but not limited to, filling out permits, monitoring the space for atmospheric hazards and using lifelines, harnesses and retrieval devices. Abatement certification must be submitted for this item. |
|
| Citation ID |
01004B |
| Citaton Type |
Other |
| Standard Cited |
19100146 E01 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-30 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
2 |
| Nr Exposed |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.146(e)(1): Before entry was authorized, the employer did not document the completion of measures required by 29 CFR 1910.146(d)(3) by preparing an entry permit: a) Fire pit, on or about the week of 5/7/17: Employees enter the fire pit, a permit required confined space, to inspect pumps and a diesel tank. The employer failed to ensure that an entry permit was prepared to document that the required precautions were completed prior to authorizing entry into the fire pit. Abatement certification must be submitted for this item. |
|
| Citation ID |
01005 |
| Citaton Type |
Other |
| Standard Cited |
19100146 G02 IV |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-30 |
| Current Penalty |
8963.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.146(g)(2)(iv): The employer did not provide training to each affected employee whenever the employer had reason to believe either that there were deviations from the permit space entry procedures required by 29 CFR 1910.146(d)(3) or that there inadequacies in the employee's knowledge or use of these procedures: a) Fire pit, on or about the week of 5/7/17: Retraining on permit required confined space procedures was not provided for employees entering the fire pit, a permit required confined space, to inspect pumps. Since changes in management occurring in summer of 2016 employees entered the pit without taking recognized precautions required for permit required confined space entry including, but not limited to, filling out permits, monitoring the space for atmospheric hazards and using lifelines, harnesses and retrieval devices. Abatement certification must be submitted for this item. |
|
| Citation ID |
01006A |
| Citaton Type |
Serious |
| Standard Cited |
19100146 K02 IV |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2018-02-05 |
| Current Penalty |
5986.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.146(k)(2)(iv): The employer did not ensure that affected employees practice making permit space rescues at least once every 12 months, by means of simulated rescue operations in which they remove dummies, manikins, or actual persons from the actual permit spaces or from representative permit spaces: a) Throughout the facility, on or about the week of 5/7/17: No drills to practice rescues from permit required confined spaces, such as the fire pit and waste water tanks, were performed by employees designated by the employer to provide permit space rescues and emergency services. Abatement certification must be submitted for this item. |
|
| Citation ID |
01006B |
| Citaton Type |
Serious |
| Standard Cited |
19100146 K03 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-19 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.146(k)(3): Whenever an authorized entrant entered a permit space, retrieval systems or methods were not used to facilitated non-entry rescues: a) Throughout the facility, on or about the week of 5/7/17: Retrieval systems such as life lines and harnesses were not worn by employees required to enter permit required confined spaces such as, but not limited to, the fire pit. Abatement certification must be submitted for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100095 L01 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
16 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(l)(1): The employer did not post of copy of 29 CFR 1910.95 in the workplace: a) Ammo department, on or about 5/15/17: Pellet room and BB line employees were exposed to noise above 85 dBA, based on an 8- hour time weighted average. A copy of OSHA's noise standard was not posted in the workplace. Abatement certification must be submitted for this item. |
|
| Citation ID |
02002A |
| Citaton Type |
Other |
| Standard Cited |
19100134 C01 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2018-02-05 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(1): The respiratory protection program was not updated as necessary to reflect those changes in workplace conditions that affected respirator use: a) Throughout the facility, on or about 5/15/17: The respiratory protection program developed in 1993 was not updated to include information including, but not limited to: 1) Method of fit-testing; 2) Identity of medical evaluation provider; 3) Current titles of company officials with responsibilities regarding the program; 4) Selection of respirators based on newly revised or eliminated departmental functions; 5) No method on soliciting employee feedback on program's effectiveness is stated in the program Abatement certification must be submitted for this item. |
|
| Citation ID |
02002B |
| Citaton Type |
Other |
| Standard Cited |
19100134 L01 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(l)(1): Evaluations of the workplace were not conducted to ensure the written respiratory protection program was being effectively implemented: a) Throughout the facility, on or about 5/15/17: Regular evaluations of the respirator program through employee feedback was not performed for employees in the respiratory protection program. Abatement certification must be submitted for this item. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19101020 G01 I |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-02 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1020(g)(1)(i): Upon first entering into employment, and/or at least annually thereafter, the employer did not inform current employees of the existence, location, and availability of any records covered by 29 CFR 1910.1020: a) Pellet room, On or about 5/15/17: Employees working in pellet area with exposure to airborne lead were neither initially nor annually notified of existence, location, availability, rights of accessibility to exposure records including, but not limited, lead air monitoring performed in Pellet room in July of 2016 and December of 2016. Abatement certification must be submitted for this item. |
|
| Citation ID |
02004 |
| Citaton Type |
Other |
| Standard Cited |
19101025 L01 I |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-30 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(l)(1)(i): Employee(s) working in an area where there is potential exposure to airborne lead at any level were not informed of the content of Appendices A and B of 29 CFR 1910.1025: a) Pellet room, On or about 5/15/17: A pellet header operator was exposed to lead at 0.0095 mg/m^3 of lead during the 463 minute sampling period. A zero exposure increment was included for the 17 minutes not sampled. The employee was not provided with information on Appendices A & B of the OSHA Lead standard, 29 CFR 1910.1025. Abatement certification must be submitted for this item. |
|
|
|
342275765
|
0215800
|
2017-04-25
|
7629 ROUTES 5 & 20, BLOOMFIELD, NY, 14469
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2017-06-08
|
| Emphasis |
N: AMPUTATE, N: SVEP, P: AMPUTATE
|
| Case Closed |
2019-09-26
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
5A0001 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
5986.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
7 |
| Nr Exposed |
7 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
OSH ACT of 1970 Section (5)(a)(1): OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which were free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to struck by hazards: a) The following below-the-hook lifting devices were not inspected and/or had no rated load capacity markings: 1. Steel Storage off Machine Shop, on or about 5/9/17: A two ton spreader beam attached to a two ton CM Lodestar overhead hoist, used to lift steel bars, was not inspected. 2. Chip Room off Machine Shop, on or about 5/9/17: A Cecor spreader beam attached to a Dayton 1/2 ton chain hoist, used to dump chip containers, had no rated load capacity markings on it and had not been inspected. 3. Ammo, Cupping Area, on or about 5/9/17: A two ton C-hook below-the-hook lifting device attached to a Harrington two ton crane for lifting coils was not inspected. Among other methods, feasible and acceptable abatement methods to correct these hazards are to: 1. Inspect the lifting devices in accordance with ASME B30.20-2010, Section 20-1.3. 2. Mark the rated load capacity on the device in accordance with ASME B30.20-2010, Section 20-1.2.1. b) The following overhead hoists did not have the rated load capacity markings on the hoist: 1. Bluing Room, on or about 5/9/17: A David Brown overhead hoist, used to lift baskets of parts at the dip tanks, had no rated load capacity markings on it. 2. BB Grinder Area, on or about 5/9/17: A CM Lodestar 1/2 ton hoist, used to lift containers of BB's, was not clearly marked as to its rated load capacity. Among other methods, feasible and acceptable abatement methods to correct these hazards are to: 1. Mark the rated load capacity on the hoist in accordance with ASME B30.16-2007, Section 16-1.1. c) The following bridge crane structure had no rated load capacity markings and the hoist was underrated for what the monorail was rated for: 1. Ammo Pellet Header Dept., on or about 5/9/17: CM Lodestar overhead hoist attached to a bridge rail system, used to pick up bins of scrap metal, did not have the rated load capacity markings on it. 2. BB Grinder Area, on or about 5/9/17: A CM Lodestar 1/2 ton hoist, used to lift containers of BB's, was mounted to a monorail rated for one ton. Among other methods, feasible and acceptable abatement methods to correct these hazards are to: 1. Re-rate the monorail systems to match the rating of the hoist in accordance with ASME B30.11-2010, Section 11-1.1. 2. Mark the rated load capacity markings on the bridge crane in accordance with ASME B30.11-2010, Section 11-1.1. Abatement documentation must be submitted for these items. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100022 A03 |
| Issuance Date |
2017-10-13 |
| Current Penalty |
7060.0 |
| Initial Penalty |
10755.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(a)(3): Walking-working surfaces were not maintained free of hazards such as sharp or protruding objects, loose boards, corrosion, leaks, spills, snow, and ice: a) Ammo Dept., on or about about 5/4/17: Platform for access to the feeder bowl for the Double Bank Redraw, B side, had a hose line and chains laying on the platform. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100025 B03 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.25(b)(3): Stairs did not have uniform riser heights and tread depths between landings: a) Ammo Dept., on or about about 5/4/17: Fixed stairway with five risers for access to the feeder bowl for the Double Bank Redraw, B side, did not have uniform riser height. Abatement certification must be submitted for this item. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I |
| Issuance Date |
2017-10-13 |
| Current Penalty |
8137.0 |
| Initial Penalty |
12548.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) Ammo Dept., Chopper #3, on or about 5/4/17: Employee servicing the Chopper #3 where work was being performed on the die and chopper head and the equipment was not locked out, had not received training as an authorized employee to ensure that the employee acquired the knowledge and skills required for the safe application, usage and removal of energy control devices. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100157 G02 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2018-04-09 |
| Current Penalty |
3835.0 |
| Initial Penalty |
5378.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
21 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) At the establishment, on or about 4/27/17: Annual training was not provided to designated employees on the use of fire extinguishers and the hazards involved with incipient stage fire fighting in that the last training was conducted 7/7/15. *ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38 and 29 CFR 1910.39 which includes the evacuation requirements of 29 CFR 1910.157(b). Abatement certification must be submitted for this item. |
|
| Citation ID |
01005 |
| Citaton Type |
Serious |
| Standard Cited |
19100178 L04 III |
| Issuance Date |
2017-10-13 |
| Current Penalty |
3835.0 |
| Initial Penalty |
5378.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) At the establishment, on or about 4/27/17: An evaluation of each powered industrial truck operator's performance was not conducted at least once every three years. |
|
| Citation ID |
01006A |
| Citaton Type |
Serious |
| Standard Cited |
19100184 D |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-25 |
| Current Penalty |
8137.0 |
| Initial Penalty |
12548.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.184(d): Each day before being used, the sling and all fastenings and attachments were not being inspected for damage or defects by a competent person designated by the employer and damaged or defective sling(s) were not immediately removed from service: a) Maintenance Area, Welding Room, on or about 5/4/17: Alloy steel chain slings were not being inspected prior to use. Three alloy steel chain slings had bent and broken links and had not been removed from service. Abatement documentation must be submitted for this item. |
|
| Citation ID |
01006B |
| Citaton Type |
Serious |
| Standard Cited |
19100184 E02 II |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.184(e)(2)(ii): Makeshift link(s) or fastener(s) formed from bolts or rods, or other such attachment(s) on alloy steel chain sling(s) were being used: a) Maintenance Area, Weld Shop, on or about 4/27/17: A nut, bolt and washer was being used on an alloy steel chain sling. Abatement documentation must be submitted for this item. |
|
| Citation ID |
01007A |
| Citaton Type |
Serious |
| Standard Cited |
19100184 E01 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-25 |
| Current Penalty |
5986.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
4 |
| Nr Exposed |
6 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.184(e)(1): Alloy steel sling(s) did not have permanently affixed durable identification stating size, grade, rated capacity, and reach: a) Ammo Dept., on or about 5/3/17: Chain sling at the Bullard vertical turret lathe had no identification tag indicating size, grade, rated capacity and reach. b) Weld Shop, on or about 5/4/17: Three alloy steel chain slings had no identification tags indicating size, grade, rated capacity and reach. Abatement certification must be submitted for these items. |
|
| Citation ID |
01007B |
| Citaton Type |
Serious |
| Standard Cited |
19100184 E03 I |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2018-04-09 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
10 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.184(e)(3)(i): A thorough periodic inspection of alloy steel chain slings was not made on a regular basis and/or were done at intervals greater than once every 12 months: a) Maintenance Area, Ammo Dept., on or about 5/4/17: There were no inspections being done of alloy steel chain slings. Abatement certification must be submitted for this item. |
|
| Citation ID |
01008 |
| Citaton Type |
Serious |
| Standard Cited |
19100217 E01 I |
| Issuance Date |
2017-10-13 |
| Current Penalty |
5986.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
7 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.217(e)(1)(i): A program of periodic and regular inspections of mechanical power press(es) was not established and followed to ensure that all parts, auxiliary equipment and safeguards were in a safe operating condition and adjustment: a) Soldering Room, on or about 4/21/17: Press inspections on a L & J mechanical power press #12 were not being done on a periodic or weekly basis in that the last inspections were done July, 8, 2016. b) Machine Shop, Press area, on or about 4/25/17: Press inspections on mechanical power presses, including, but not limited to Minster #9, Walsh #10, L&J #11, Niagara #14, Federal #5 and #6 were not being done on a periodic or weekly basis in that the last inspections were done July 8, 2016. |
|
| Citation ID |
01009A |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B07 |
| Issuance Date |
2017-10-13 |
| Current Penalty |
5986.0 |
| Initial Penalty |
8963.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(7): Electric equipment was not installed in a neat and workmanlike manner: a) Assembly, Dept. 1204, on or about 4/27/17: A 110 volt flexible cord providing current to a safety painter unit was spliced to conductors with wire nuts. |
|
| Citation ID |
01009B |
| Citaton Type |
Serious |
| Standard Cited |
19100305 G02 III |
| Issuance Date |
2017-10-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) Receiving Warehouse, on or about 4/27/17: Flexible cord providing current to a Herculite dock light at Door #15 was pulled loose from the fitting, no strain relief. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100028 B01 I |
| Issuance Date |
2017-10-13 |
| Current Penalty |
9213.0 |
| Initial Penalty |
14341.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2m) or more above a lower level was protected from falling by guardrail systems, safety net system, or personal fall arrest system: a) Ammo Dept., on or about 5/4/17: Employees were not protected from falling from the feeder bowl platform at the Double Bank Redraw, B side, located 5 feet from floor level. The Crosman Corporation was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.23(c)(1), which was contained in OSHA inspection number 283828, citation number 1, item number 2 and was affirmed as a final order on 3/14/13, with respect to a workplace located at 7629 Routes 5 & 20, Bloomfield, NY 14469. |
|
| Citation ID |
02002 |
| Citaton Type |
Repeat |
| Standard Cited |
19100028 B03 I |
| Issuance Date |
2017-10-13 |
| Current Penalty |
9213.0 |
| Initial Penalty |
14341.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.28(b)(3)(i): The employer did not ensure each employee is protected from falling through any hole (including skylights) that is 4 feet (1.2 m) or more above a lower level by one or more of the following: covers, guardrail systems, travel restraint systems, or personal fall arrest systems, as required by sub-items A through D of this section. a) Ammo Dept., on or about 5/4/17: Employees were not protected from falling into the coater sump pump pit, approximately 10 feet deep, at the BB coater pumps 1 and 2. The Crosman Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard 29 CFR 1910.22(c) which was contained in OSHA inspection number 283828, citation number 1, item number 1 and was affirmed as a final order on 3/14/13, with respect to a workplace located at6 7629 Routes 5 & 20, Bloomfield, NY 14469. |
|
| Citation ID |
02003 |
| Citaton Type |
Repeat |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-10-25 |
| Current Penalty |
15665.0 |
| Initial Penalty |
25097.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Ammo Dept., Chopper #3, on or about 5/4/17: Lockout procedures were not utilized on Chopper #3 where work was being performed on the die and chopper head. The Crosman Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, which was contained in OSHA inspection number 283828, citation number 1, item number 5a and was affirmed as a final order on 3/14/13, with respect to a workplace located at 7629 Routes 5 & 20, Bloomfield, NY 14469. |
|
| Citation ID |
02004 |
| Citaton Type |
Repeat |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
11367.0 |
| Initial Penalty |
17927.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) At the establishment, on or about 4/25/17: Annual inspections of the energy control procedures were not conducted to ensure that the procedures and requirements of the standard were being followed. Servicing and maintenance is performed on various equipment, including, but not limited to mechanical power presses and screw machines. The Crosman Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, which was contained in OSHA inspection number 283828, citation number 1 item number 5b and was affirmed as a final order on 3/4/13, with respect to a workplace located at 7629 Routes 5 & 20, Bloomfield, NY 14469. ABATEMENT DOCUMENTATION MUST BE SUBMITTED FOR THIS ITEM. |
|
| Citation ID |
02005 |
| Citaton Type |
Repeat |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2017-10-13 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
15665.0 |
| Initial Penalty |
25097.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
9 |
| Nr Exposed |
4 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Soldering Room, Soldering Oven, on or about 4/25/17: Moving table and paste guns and pinch points were not guarded at the paste station in that the light curtains were deactivated and the two hand trips did not prevent entry into the danger zone. b) Machine Shop, on or about 4/25/17: Ingoing nip points and pinch points at the cables and pulleys for the bar feeder on Brown & Sharpe screw machines #12, 13, 17, 19 were not guarded. c) Machine Shop, on or about 4/27/17: Pinch points at the clamping device for the deburring wheel on Brown & Sharpe screw machines # 13 and 17 were not guarded. d) Ammo Dept., Marker Area, on or about 5/4/17: Ingoing nip points and pinch points created by the feeder device that advances the bottle into the indexing table for Marker #1 and Marker #2 were not guarded. Abatement documentation must be submitted for instance c. The Crosman Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, which was contained in OSHA inspection number 283828, citation number 1, item number 8 and was affirmed as a final order on 3/4/13, with respect to a workplace located at 7629 Routes 5 & 20, Bloomfield, NY 14469. |
|
| Citation ID |
02006 |
| Citaton Type |
Repeat |
| Standard Cited |
19100304 G05 |
| Issuance Date |
2017-10-13 |
| Current Penalty |
7060.0 |
| Initial Penalty |
10755.0 |
| Contest Date |
2017-10-30 |
| Final Order |
2018-03-08 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) Ammo Dept., on or about 5/4/17: Pedestal fan was not grounded in that the duplex receptacle outlet that it was plugged into, was not grounded. b) Ammo Dept., Lathe Area, on or about 5/4/17: Pedestal fan was not grounded by the workbench next to the breakers panel AMLP-1 in that the duplex receptacle outlet that it was plugged into, was not grounded. c) Farmington Warehouse, on or about 5/9/17: A Dayton pedestal fan was not grounded in that the ground pin was missing from the plug end. The Crosman Corporation was previously cited for a violation of this Occupational Safety and Health standard or its equivalent standard, which was contained in OSHA inspection number 283828, citation number 1, item number 18 and was affirmed as a final order on 3/14/13, with respect to a workplace located at 7629 Routes 5 & 20, Bloomfield, NY 14469. |
|
|
|
333320661
|
0215800
|
2012-04-04
|
7629 ROUTES 5 & 20, BLOOMFIELD, NY, 14469
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
2012-07-09
|
| Emphasis |
L: HHHT50
|
| Case Closed |
2013-04-26
|
Related Activity
| Type |
Inspection |
| Activity Nr |
283828 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Repeat |
| Standard Cited |
19101025 H01 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
10875.0 |
| Initial Penalty |
15000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead: a) In the Quality Lab firing range, on or about 5/30/12: Desks in the firing range area, which contained accumulations of lead, were not maintained as free as practicable of lead accumulation, as they were cleaned on a weekly basis. Abatement documentation must be submitted for this item. The employer was previously cited for a violation of this Occupational Safety and Health standard which was contained in OSHA inspection number 312374515, Citation Number 1, Item 4 and was affirmed as a final order on 6/25/10 with respect to a workplace located at Routes 5 & 20, East Bloomfield, NY 14443. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19040004 A |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1904.4(a): The employer did not record each work-related fatality, injury or illness case that resulted in the general recording criteria on the OSHA Form 300 or equivalent. a) At the facility, on or about 3/27/12: The OSHA 300 Injury and Illness log for 2012 did not contain specific information in column F to explain the object/substance that directly injured or made the person ill. Abatement certification must be submitted for this item. |
|
| Citation ID |
02002A |
| Citaton Type |
Other |
| Standard Cited |
19100124 J01 I |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.124(j)(1)(i): Hoods and ductwork of the ventilation system were not inspected for corrosion or damage at least quarterly during operation: a) In the ammo department, on or about 4/4/12: Hoods and ductwork of the ventilation system for the zinc barrel line were not inspected for corrosion or damage at least quarterly. Abatement certification must be submitted for these items. |
|
| Citation ID |
02002B |
| Citaton Type |
Other |
| Standard Cited |
19100124 J02 I |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.124(j)(2)(i): The employer did not ensure airflow was adequate at least quarterly during operation: a) In the ammo department, on or about 4/4/12: Quarterly inspections of airflow were not conducted for ventilation on the zinc barrel line. b) In the blueing room, on or about 4/4/12: Quarterly inspections of airflow were not conducted for ventilation on the blueing line. Abatement certification must be submitted for this item. |
|
| Citation ID |
02003A |
| Citaton Type |
Other |
| Standard Cited |
19101025 D02 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level: a) In the QA lab firing range, on or about 5/30/12: An initial determination was not made to determine employee exposure to lead during test firing of guns using lead pellets. |
|
| Citation ID |
02003B |
| Citaton Type |
Other |
| Standard Cited |
19101025 H02 II |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(h)(2)(ii): Shoveling, sweeping or brushing methods were used to remove lead accumulations where vacuuming or other equally effective methods were available and feasible: a) In the QA lab firing range, on or about 5/30/12: Dry sweeping was conducted to perform daily clean up after test firing of guns using lead pellets. Abatement certification must be submitted for this item. |
|
| Citation ID |
02004 |
| Citaton Type |
Other |
| Standard Cited |
19101048 D01 I |
| Issuance Date |
2012-09-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1048(d)(1)(i): Employees of a workplace covered by this standard were not monitored to determine their exposure to formaldehyde: a) In the BB marker area, on or about 4/26/12: Where employees use T-15 Blaze orange pigment to coat BB pellets, the employer did not perform exposure monitoring for formaldehyde. b) In the woodshop, on or about 4/26/12: Where employees spray Sher-wood Hi-Bild PreCat Lacquer in a spray booth, the employer did not perform exposure monitoring for formaldehyde. c) In the paint spray area, on or about 4/26/12: Where employees operate automated booths spraying KEM AQUA 1400 Water Reducible Baking Enamel, the employer did not perform exposure monitoring for formaldehyde. |
|
|
|
332838283
|
0215800
|
2012-03-29
|
7629 ROUTES 5 & 20, BLOOMFIELD, NY, 14469
|
|
| Inspection Type |
Referral
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2012-05-09
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2014-01-07
|
Related Activity
| Type |
Inspection |
| Activity Nr |
332066 |
| Health |
Yes |
|
| Type |
Referral |
| Activity Nr |
220032 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100022 C |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
6 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(c): Covers and/or guardrails were not provided to protect personnel from the hazards of open pits, tanks, vats, ditches, etc.: a) Bluing Room, Mixer Area, on or about 4/4/12: Two 12 inch floor holes over the holding tank mixers were not covered. b) Treatment Bldg., on or about 4/5/12: An opening in the floor drain grating between press 1 and 2, measuring 5" X 9 1/2" was not covered and an opening in the floor drain grating at the clarifier, measuring 6" X 7" was not covered. c) Treatment Bldg., on or about 4/5/12: The waste water discharge pit, measuring 24" X 24" X 42" deep was not covered. d) Ammo Dept., on or about 4/12/12: An opening in the sump pump pit next to the Titantic, measuring 9" X 15" was not covered. Abatement certification must be submitted for item c. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100023 C01 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
6 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.23(c)(1): Open-sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides: a) Chip Room, on or about 4/4/12: Overhead storage area over the screw machine workshop, approximately 9 feet from floor level, was not provided with standard guardrails. b) Assembly Area, on or about 4/5/12: Overhead storage area over the first aid office, approximately 10 feet from floor level, was not provided with standards guardails. c) Treatment Bldg., on or about 4/5/12: Catwalk for clarifier, approximately 10 feet from floor level, was not adequately guarded in there were guardrails missing in a three foot section and there were midrails missing on one end. d) Old Receiving Area, on or about 4/11/12: Storage area over the phone room, approximately 10 feet from floor level was not provided with guardrails and the area over the ammo office had midrails missing. e) Maintenance Woodshop, on or about 4/12/12: Overhead storage area over the woodshop, approximately 10 feet from floor level was not provided with guardrails. f) Ammo Dept., Tank Farm, on or about 4/12/12: Platform for the oil and mop water tank was not provided with guardrails on the left side. Abatement certification must be submitted for item c. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100107 B05 I |
| Issuance Date |
2012-09-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
4 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.107(b)(5)(i): Visible gauges or audible alarm or pressure activated devices were not installed to indicate or insure that the required air velocity is maintained: a) Room off the Solder Room, on or about 4/4/12: A Binks spray booth was not provided with a manometer or equivalent. b) Paint Room, on or about 4/5/12: The manometers on Spray booth #1 and spray booth #2 were not functioning. c) Wood Shop. on or about 4/5/12: A Paasche spray booth was not provided with a manometer or equivalent. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100107 B10 |
| Issuance Date |
2012-09-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.107(b)(10): Panels did not effectively isolate the spraying area from the area in which the lighting unit was located: a) Paint Room, on or about 4/5/12: The transparent lens was broken for the light fixture in the touchup paint spray booth. |
|
| Citation ID |
01003C |
| Citaton Type |
Serious |
| Standard Cited |
19100107 G02 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
3 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.107(g)(2): All spraying areas were not kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary: a) Paint Room, on or about 4/5/12: Spray booth 1 and 2 had a heavy accumulation of combustible residue on the walls of the booths. b) Wood Shop, on or about 4/5/12: Paasche spray booth had a heavy accumulation of combustible residue on the walls of the booth. Abatement certfication must be submitted for these items. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100110 E04 III |
| Issuance Date |
2012-09-27 |
| Current Penalty |
2115.0 |
| Initial Penalty |
3000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.110(e)(4)(iii): Permanent and removable fuel containers were not securely mounted to prevent jarring loose, slipping, or rotating: a) Assembly, on or about 4/11/12: Yale forklift #3230 for BB marker did not have the LP gas container secured in place in that there was no locater pin to secure the tank. Abatement certification must be submitted for this item. |
|
| Citation ID |
01005A |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-04 |
| Current Penalty |
5075.0 |
| Initial Penalty |
7000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Machine Shop, on or about 3/27/12: Lockout procedures were not utilized on a Federal part revolution mechanical power press #4, Serial #26-3496 resulting in serious injury to an employee. Abatement documentation must be submitted for this item. |
|
| Citation ID |
01005B |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct an annual or more frequent inspection of the energy control procedure to ensure that the procedure and requirements of this standard were followed: a) At the establishment, on or about 3/27/12: Annual inspections of the energy control procedures were not conducted to ensure that the procedures and requirements of the standard were being followed. Servicing and maintenance is performed on various equipment, including, but not limited to mechanical power presses and screw machines. Abatement documentation must be submitted for this item. |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100151 C |
| Issuance Date |
2012-09-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) Finishing Room, on or about 4/5/12: There was no eyewash provided for employees using and/or dispensing SR201, a corrosive material for the tumblers. b) Paint Room, on or about 4/5/12: There was no eyewash provided for employees using and/or dispensing Morphos 101LTF, a corrosive material. |
|
| Citation ID |
01007 |
| Citaton Type |
Serious |
| Standard Cited |
19100176 B |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
9 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.176(b): Material storage racks had damaged vertical supports and materials stored on storage racks were not stable: a) Warehouse/Receiving, on or about 4/5/12: Vertical uprights and cross bracing on storage racks were damaged at R2-A10, R6-A1, R12-A1, across from R12-R13 at finished product holding area and a pallet with material was broken at R8-B12 and not secured from sliding or collapse. b) Farmington Warehouse, on or about 4/11/12: Vertical uprights on storage racks were damaged at S19, S45, S37-A17 and S32-A1. Abatement certification is required for these items. |
|
| Citation ID |
01008 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
5075.0 |
| Initial Penalty |
7000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
49 |
| Nr Exposed |
16 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): Machine guarding was not provided to protect operator(s) and other employees from hazard(s) created by rotating parts, ingoing nip points, moving parts and pinch points: a) Machine Shop, on or about 4/4/12: Rotating chucks on the following machines were not guarded, including, but not limited to: Wilton drill press #5, Buffalo drill press #15, Snow drill/tap machines #002, 003, 004, 005, the 766 drill fixture, Aro deburrer for Rifler #2 along with the horizontal rotating screw drive, Aro deburrer for Rifler #1, and Dayton CNC drill press. b) Machine Shop, on or about 4/4/12: Unused portion of saw on a Wells horizontal bandsaw was not guarded on the right side. c) Machine Shop, on or about 4/4/12: Ingoing nip points and pinch points at the cables and pulleys for the Brown & Sharpe screw machines #11, 13, 14, 15, 16, 17, 18, 19, 20 were not guarded. d) Machine Shop, on or about 4/4/12: Brown & Sharpe screw machine #13 and #17, rotating chuck on the deburring attachments and pinch points at the clamping devices were not guarded. e) Machine Shop, on or about 4/4/12: Rotating chuck on a Clausing lathe was not guarded. f) Solder Room, on or about 4/4/12: Rotating chucks on the following drill presses were not guarded: A Clausing, two Buffalo #04 and #9, and a Jet #06. g) Solder Room, on or about 4/4/12: Two rotating chucks on a Benjamin drilling fixture were not guarded. h) Finishing Room, on or about 4/5/12: Rotating chucks on seven Buffalo drill presses were not guarded. i) Wood Shop, on or about 4/5/12: Rotating chucks on a Buffalo drill press and a Jet milling/drilling machine were not guarded. j) Assembly, on or about 4/11/12: Ingoing nip points on a 760 wheel conveyor and a R71 wheel conveyor were not guarded where sections of conveyor slats were broken and/or missing. k) Assembly, 2100 Cell, on or about 4/11/12: Rotating parts and moving parts on the pump cup rod assembly pinning operation were not guarded. l) Assembly, Benjamin Rifle Cell, on or about 4/11/12: There was no guard over the foot pedal on a valve winder to protect from unintended operation. m) Assembly, Benjamin Rifle Cell, on or about 4/11/12: Rotating chucks on two Buffalo drill presses were not guarded. n) Farmington Warehouse, UPS Bay 3, on or about 4/11/12: Ingoing nip points on an International Baler were not guarded in that the interlock switch was not functioning and the baler could be operated with the doors open. o) Ammo Dept., Marker #2, on or about 4/12/12: Ingoing nip points, moving parts and pinch points on Marker #2 machine were not guarded. p) Ammo Dept., BB Chopper Area, on or about 4/12/12: Ingoing nip points on the feed rollers for BB choppers #1, 2 and 3 were not guarded. Abatement documentation must be submitted for items a,c,f,i,n,o. |
|
| Citation ID |
01009 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
14 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Machine Shop, on or about 4/4/12: Point of operation was not adequately guarded on 00G Model Brown & Sharpe screw machines #6, 7, 8, 9 and 15 and 2G Model Brown & Sharpe screw machines # 17, 18, 19. b) Assembly, on or about 4/11/12: Point of operation was not guarded on two Bracker presses at Line 417, Bracker press at Line 1088, Bracker press at Line 66, Bracker press at Line 1300 and Bracker press #005 at the Break Barrel Line. Abatement certification must be submitted for these items. |
|
| Citation ID |
01010 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 B |
| Issuance Date |
2012-09-27 |
| Current Penalty |
2900.0 |
| Initial Penalty |
4000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
4 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(b): Machine(s) designed for fixed location(s) were not securely anchored to prevent walking or moving: a) Wood Shop, on or about 4/5/12: Buffalo drill press for #4 Benjamin forearm was not anchored to prevent walking or moving. b) Assembly, Benjamin Rifle Cell, on or about 4/11/12: Two Buffalo drill presses were not anchored to prevent walking or moving. c) EDM Room, on or about 4/12/12: A KT Industries pedestal drill press, Serial #266793, was not anchored to prevent walking or moving. |
|
| Citation ID |
01011 |
| Citaton Type |
Serious |
| Standard Cited |
19100213 H01 |
| Issuance Date |
2012-09-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material being cut: a) Wood Shop, on or about 4/5/12: A Craftsman 10 inch radial arm saw was not provided with a lower blade guard on the right side. b) Maintenance Woodworking Shop, on or about 4/12/12: A DeWalt radial arm saw was not provided with lower blade guards. |
|
| Citation ID |
01012A |
| Citaton Type |
Serious |
| Standard Cited |
19100217 B06 I |
| Issuance Date |
2012-09-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.217(b)(6)(i): Two-hand trip(s) on mechanical power press(es) using full revolution clutches did not have the individual operator's hand controls protected against unintentional operation: a) Machine Shop, on or about 4/4/12: Two hand controls on two L&J full revolution mechanical power presses #12 and #14 did not have the two hand trip buttons protected from unintended operation. |
|
| Citation ID |
01012B |
| Citaton Type |
Serious |
| Standard Cited |
19100217 B07 III |
| Issuance Date |
2012-09-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.217(b)(7)(iii): Fixing of selection of off, inch, single stroke and continuous on mechanical power press(es) using part revolution clutches were not capable of supervision by the employer: a) Machine Shop, on or about 3/29/12: The keys were left in the controls for the run/jog and hand/foot mode on Federal part revolution mechanical power press #4, Serial #26-3496. b) Machine Shop, on or about 3/29/12: The keys were left in the controls for the single stroke/continuous and foot/continuouse mode on Federal part revolution mechanical power Press #3, Serial #4-2170. |
|
| Citation ID |
01012C |
| Citaton Type |
Serious |
| Standard Cited |
19100217 C02 I A |
| Issuance Date |
2012-09-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.217(c)(2)(i)(a): Point of operation guard(s) on mechanical power press(es) did not prevent entry of hands or fingers into the point of operation by reaching through, over, under or around the guard(s) a) Machine Shop, on or about 4/4/12: Point of operation on a L&J full revolution mechanical power press #12 was not adequately guarded in that a section of guarding was missing on the right side, opening measured 2 1/2" X 10" X 8". |
|
| Citation ID |
01013A |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C04 I |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
4 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: a) Ammo Dept., CO2 filler room, on or about 4/12/12: Rotating shaft end with keyway at the O12 conveyor gear box was not guarded. b) Ammo Dept., Pellet Packer Room, on or about 4/12/12: Rotating shaft end with setscrews on the pellet filler was not guarded. c) Ammo Dept., on or about 4/12/12: Rotating shaft end at the feeder for the Bliss #1 cupper press, left side, was not guarded. d) Ammo Dept., on or about 4/12/12: Rotating shaft end with setscrews driving the scrap conveyor for the double bank redraw machine was not guarded. Abatement certification must be submitted for item b, c. |
|
| Citation ID |
01013B |
| Citaton Type |
Serious |
| Standard Cited |
19100219 I02 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(i)(2): Revolving surfaces of shaft coupling(s) were not covered by a safety sleeve: a) Ammo Dept., BB Coater, on or about 4/12/12: Rotating shaft coupling on the BB coater next to the coater platform was not guarded. Abatement certfication must be submitted for this item. |
|
| Citation ID |
01014A |
| Citaton Type |
Serious |
| Standard Cited |
19100219 D01 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
4 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Machine Shop, on or about 4/4/12: Pulleys driving the main shaft on the Brown & Sharpe screw machine #19 were not guarded. b) Ammo Dept., BB Chopper Area, on or about 4/12/12: Pulleys driving the BB chopper #2 were not adequately guarded in that the guard was damaged and pulled away, exposing the pulleys. c) Ammo Dept., on or about 4/12/12: Two sets of pulleys driving the roll stock feeder for the Bliss #1 cupper press were not adequately guarded. Abatement certification must be submitted for item c. |
|
| Citation ID |
01014B |
| Citaton Type |
Serious |
| Standard Cited |
19100219 E03 I |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
4 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): a) Machine Shop, on or about 4/4/12: Flat belt driving the main shaft on the Brown & Sharpe screw machine #19 was not guarded. b) Ammo Dept., BB Chopper Area, on or about 4/12/12: V belts driving chopper #2 were not adequately guarded in that the guard was damaged and pulled away, exposing the belts. c) Ammo Dept., on or about 4/12/12: Two belts driving the roll stock feeder on the Bliss #1 cupper press were not adequately guarded. Abatement certification must be submitted for item c. |
|
| Citation ID |
01015 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 F03 |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
6 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a) Machine Shop, on or about 4/4/12: Chain and sprockets driving the oil pump on Brown & Sharpe screw machine #18 were not guarded. b) Ammo Dept., on or about 4/12/12: Three chains and sprockets driving the flight conveyor for the Titanic supply pump for BBs were not guarded. c) Ammo Dept., on or about 4/12/12: Two sets of chain and sprockets driving the roll stock feeder for the Bliss #1 cupper were not enclosed. Abatement certification must be submitted for item c. |
|
| Citation ID |
01016 |
| Citaton Type |
Serious |
| Standard Cited |
19100242 B |
| Issuance Date |
2012-09-27 |
| Current Penalty |
2115.0 |
| Initial Penalty |
3000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
6 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Quality Shooting Range, on or about 4/5/12: Compressed air gun measured approximately 90 psi. b) Ammo Dept., on or about 4/12/12: Compressed air guns at Dunham lathes #1289, 1290, 1292 and 1293 measured approximately 90 psi. c) Tool Room, EDM Room, on or about 4/12/12: A compressed air gun at the Sunnen honing machine measured approximately 90 psi. |
|
| Citation ID |
01017A |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B07 IV |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-04 |
| Current Penalty |
2115.0 |
| Initial Penalty |
3000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(7)(iv): There were damaged parts that could adversely affect safe operation or mechanical strength of the equipment, such as parts that were broken, bent, cut, or deteriorated by corrosion, chemical action, or overheating: a) Warehouse/Receiving, on or about 4/5/12: Flexible conduit providing current to a Ferro battery charger was unraveling, exposing conductors to damage. b) Farmington Warehouse, on or about 4/11/12: Flexible cord providing current to a Lantech wrapper at Bay 4 had damage to the outer insulation of the cord. Abatement certification must be submitted for item b. |
|
| Citation ID |
01017B |
| Citaton Type |
Serious |
| Standard Cited |
19100305 B01 III |
| Issuance Date |
2012-09-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(1)(iii): Cable was not secured to the cabinet, cutout box, or meter socket enclosure:: a) Ammo Dept., Plate Line, on or about 4/12/12: Flexible conduit was pulled loose at the water meter fitting. |
|
| Citation ID |
01018 |
| Citaton Type |
Serious |
| Standard Cited |
19100304 G05 |
| Issuance Date |
2012-09-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
3 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) Ammo Dept., 500 Count Packer Line, on or about 4/12/12: Dayton pedestal fan and a Pennsylvania scale were not grounded. b) Ammo Dept., on or about 4/12/12: A Dayton pedestal fan at the Bullard vertical turret lathe was not grounded |
|
| Citation ID |
01019 |
| Citaton Type |
Serious |
| Standard Cited |
19100305 B01 II |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
3625.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
9 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(1)(ii): Unused openings in boxes, cabinets, or fittings were not effectively closed: a) Marker BB Area, on or about 4/5/12: A circuit breaker panel #CH LP-1 had five blanks missing. b) Old Receiving Area, on or about 4/11/12: A circuit breaker panel RELP-3 had one blank missing. c) Farmington Warehouse, on or about 4/11/12: A circuit breaker panel LP3 had one blank missing and openings around the main breaker switch were not covered. d) Ammo Dept., BB Chopper area next to Chopper #1, on or about 4/12/12: A circuit breaker panel AMLPP-1 on column had one blank missing. Abatement certification must be submitted for item c. |
|
| Citation ID |
01020 |
| Citaton Type |
Serious |
| Standard Cited |
19100305 G01 IV A |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
2115.0 |
| Initial Penalty |
3000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
11 |
| Nr Exposed |
5 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) Assembly, on or about 4/11/12: Relocatable power taps (RPT's) were being used as permanent wiring, including, but not limited to, at the 1088 testing fixture station 3 and at station 4, two RPT's at the 1088 build station, RPT at line 1300 inspection range. b) Ammo Dept., on or about 4/12/12: A yellow extension cord and a relocatable power tap providing current to a Piercer machine and a light were being used as permanent wiring. c) Ammo Dept., on or about 4/12/12: An extension cord and a relocatable power tap providing current to two graphs at the burst oven were being used as permanent wiring. d) Ammo Dept., Cupper Area, on or about 4/12/12: A flexible cord next to the Bliss part revolution mechanical power press providing current to an air gauge was strung overhead and being used as permanent wiring. e) Ammo Dept., on or about 4/12/12: An extension cord strung overhead and across the floor to provide power to a sump pump for the Titanic was being used as permanent wiring. f) Ammo Dept., BB Packer, on or about 4/12/12: A flexible cord with a four way receptacle outlet attached, providing current to the taper and sealer, was being used as permanent wiring. Abatement certification must be submitted for item a. |
|
| Citation ID |
01021 |
| Citaton Type |
Serious |
| Standard Cited |
19100305 J04 II |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
2115.0 |
| Initial Penalty |
3000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(j)(4)(ii): An individual disconnecting means was not provided for each controller: a) Farmington Warehouse, on or about 4/11/12: No disconnecting means was provided for an International baler at the UPS Bay 3, in that it was directly wired into a junction box on the wall. Abatement certficiation must be submitted for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100147 C04 II |
| Issuance Date |
2012-09-27 |
| Abatement Due Date |
2012-10-27 |
| Current Penalty |
25375.0 |
| Initial Penalty |
35000.0 |
| Contest Date |
2012-10-18 |
| Final Order |
2013-03-04 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(ii): The energy control procedures did not clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, including, but not limited to Items (a) through (d) of this section: a) Machine Shop, on or about 3/29/12: There were no written energy control procedures for machinery and equipment, including, but not limited to mechanical power presses, screw machines, lathes, bar feeders, mills, Reclamet spin dryer. Abatement documentation must be submitted for this item. Employer was previously cited for a violation of this Occupational Safety and Health standard which was contained in OSHA number 312374515, Citation Number 1, Item 3 and was affirmed as a final order on 6/25/10 with respect to a workplace located at Routes 5 & 20, East Bloomfield, NY 14443. |
|
|
|
312374515
|
0215800
|
2010-03-08
|
RTES. 5 & 20, EAST BLOOMFIELD, NY, 14443
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2010-06-03
|
| Emphasis |
N: LEAD, S: LEAD, S: NOISE
|
| Case Closed |
2010-09-03
|
Related Activity
| Type |
Complaint |
| Activity Nr |
206011041 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100095 C01 |
| Issuance Date |
2010-06-15 |
| Abatement Due Date |
2010-07-18 |
| Current Penalty |
980.0 |
| Initial Penalty |
1400.0 |
| Nr Instances |
3 |
| Nr Exposed |
8 |
| Gravity |
02 |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100134 C01 |
| Issuance Date |
2010-06-15 |
| Abatement Due Date |
2010-07-18 |
| Initial Penalty |
1050.0 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
01 |
|
| Citation ID |
01003 |
| Citaton Type |
Other |
| Standard Cited |
19100147 C04 II |
| Issuance Date |
2010-06-15 |
| Abatement Due Date |
2010-07-18 |
| Initial Penalty |
1750.0 |
| Nr Instances |
1 |
| Nr Exposed |
12 |
| Gravity |
03 |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19101025 H01 |
| Issuance Date |
2010-06-15 |
| Abatement Due Date |
2010-07-18 |
| Current Penalty |
735.0 |
| Initial Penalty |
1050.0 |
| Nr Instances |
3 |
| Nr Exposed |
7 |
| Gravity |
01 |
|
|
