|
345273189
|
0214700
|
2021-04-27
|
365 BAYSHORE RD, BAY SHORE, NY, 11706
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2021-04-27
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2023-01-10
|
Related Activity
| Type |
Referral |
| Activity Nr |
1761040 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2021-10-22 |
| Abatement Due Date |
2021-11-10 |
| Current Penalty |
5461.0 |
| Initial Penalty |
5461.0 |
| Contest Date |
2021-11-12 |
| Final Order |
2022-04-11 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: 1) Worksite, Front Mill Department: Employees operating Front Mill Machine were exposed to an unguarded knife; on or about 4/22/2021. NOTE: In addition to abatement certification, the employer is required to submit abatement documentation for this violation as required by 29 CFR 1903.19 |
|
|
|
340061548
|
0214700
|
2014-11-04
|
365 BAY SHORE ROAD, DEER PARK, NY, 11729
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2014-11-04
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2015-01-15
|
Related Activity
| Type |
Referral |
| Activity Nr |
918972 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2014-12-15 |
| Abatement Due Date |
2014-12-19 |
| Current Penalty |
4900.0 |
| Initial Penalty |
4900.0 |
| Final Order |
2015-01-13 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Chopper Room: Point of operation of Granulator Machine #1 was not provided with guard; on or about 11/4/14. Note: Because abatement of this violation is already documented in the case file, the employer need not to submit certification or documentation of abatement of this violation as normally required by 29 CFR 1903.19. |
|
|
|
339611261
|
0214700
|
2014-03-05
|
365 BAY SHORE ROAD, DEER PARK, NY, 11729
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2014-03-05
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2014-08-12
|
Related Activity
| Type |
Referral |
| Activity Nr |
874845 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100022 B01 |
| Issuance Date |
2014-07-14 |
| Abatement Due Date |
2014-07-31 |
| Current Penalty |
2100.0 |
| Initial Penalty |
2800.0 |
| Final Order |
2014-08-06 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(b)(1): Aisles and passageways were not kept clear and in good repair, with no obstruction across or in aisles that could create a hazard. a) Workplace, Shipping area: Aisle was obstructed by piles of plastic rolls; on or about 3/15/14. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100037 A03 |
| Issuance Date |
2014-07-14 |
| Abatement Due Date |
2014-07-31 |
| Current Penalty |
2625.0 |
| Initial Penalty |
3500.0 |
| Final Order |
2014-08-06 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a) Worksite, Shipping Area: Emergency exit door leading to the parking lots was blocked by rolls of plastic; on or about 3/5/14. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I B |
| Issuance Date |
2014-07-14 |
| Abatement Due Date |
2014-08-28 |
| Current Penalty |
3675.0 |
| Initial Penalty |
4900.0 |
| Final Order |
2014-08-06 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i)(B): Each affected employee shall be instructed in the purpose and use of the energy control procedure. a) Worksite, Recycling Area: Employees who operated equipment such as Calender #2 were not provided with the Lockout/Tagout training; on or about 12/20/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100178 L04 III |
| Issuance Date |
2014-07-14 |
| Abatement Due Date |
2014-08-28 |
| Current Penalty |
2100.0 |
| Initial Penalty |
2800.0 |
| Final Order |
2014-08-06 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(4)(iii): An evaluation of each powered industrial truck operator's performance was not being conducted at least once every three years: a) Worksite, Shipping Area: Employee was operating Toyota forklift (Model # 7FGCU25) without being re-evaluated in its safe operation; on or about 3/5/14. b) Worksite, Shipping Area: Employee was operating Caterpillar Forklift (Model #GC25) without being re-evaluated in its safe operation; on or about 3/5/14. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903. 19. |
|
| Citation ID |
01005A |
| Citaton Type |
Serious |
| Standard Cited |
19100215 A04 |
| Issuance Date |
2014-07-14 |
| Abatement Due Date |
2014-08-28 |
| Current Penalty |
2100.0 |
| Initial Penalty |
2800.0 |
| Final Order |
2014-08-06 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: a) Worksite, Shop Area: Employee used Craftsman Bench Grinder to sharpen tools. The distance between the abrasive wheel and the work rest was measured at approximately 1 inch on both sides; on or about 3/5/14. NOTE: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
| Citation ID |
01005B |
| Citaton Type |
Serious |
| Standard Cited |
19100215 B09 |
| Issuance Date |
2014-07-14 |
| Abatement Due Date |
2014-08-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-08-06 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: a) Worksite, Shop Area: Employees use Craftsman Bench Grinder to sharpen tools. The adjustable tongue was missing on both sides; on or about 3/5/14. NOTE: The employer is required to provide abatement certification for this item in accordance with 29 CFR 1903.19. |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100304 F01 IV |
| Issuance Date |
2014-07-14 |
| Abatement Due Date |
2014-08-07 |
| Current Penalty |
1575.0 |
| Initial Penalty |
2100.0 |
| Final Order |
2014-08-06 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(f)(1)(iv): Overcurrent devices for circuits rated 600 volts, nominal, or less, were not readily accessible to each employee or authorized building management personnel: a) Worksite, Stage Area: Electrical panel boxes rated approximately 277 Volts that power lights in the work area were blocked by numerous rollers of vinyl materials; on or about 3/5/14. NOTE: The employer is required to submit abatement certification for this item in accordance to 29 CFR 1903.19. |
|
|
