| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100022 A01 |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-04-06 |
| Current Penalty |
1400.0 |
| Initial Penalty |
2800.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms or service rooms were not kept clean and orderly or in a sanitary condition. a) Saw Room, on or about 10/24/12: Excessive amounts of Class II combustible wood dust had accummulated on the floor, machinery, electrical equipment, overhead pipes and other horizontal surfaces throughout the facility. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100307 C |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-04-06 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.307(c): Equipment, wiring methods, and installations of equipment in hazardous (classified) locations were not intrinsically safe, approved for the hazardous (classified) location, or safe for the hazardous (classified) location: a) Saw Room, on or about 10/24/12: : The Saw Room is a Class II Division 2 hazardous environment. The lights and electrical equipment in this area are not properly rated for Class II, Division 2 hazardous location. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100024 F |
| Issuance Date |
2013-03-04 |
| Current Penalty |
600.0 |
| Initial Penalty |
1200.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.24(f): Rise height and tread width were not uniform throughout any flight of stairs including any foundation structure used as one or more treads of the stairs: a) Saw Dust Room, on or about 10/24/12: Fixed stair had 6 risers which had uneven rise height and tread width in that the steps were rotted and falling apart. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100024 H |
| Issuance Date |
2013-03-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.24(h): Standard railings were not provided on the open sides of all exposed stairways and stair platforms: a) Saw Dust Room, on or about 10/24/12: Fixed stair having 6 risers and was not provided with standard railings on the open sides. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100037 A03 |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-03-27 |
| Current Penalty |
1000.0 |
| Initial Penalty |
2000.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed and stairs or a ramp were not provided where the exit route was not substantially level. a) Saw and Assembly, on or about 10/24/12: Exit door in the assembly area was obstructed by wood boards which were affixed across the door opening and the exit route beyond the door was not provided with stairs to allow safe egress from the building. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C01 |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-04-06 |
| Current Penalty |
1000.0 |
| Initial Penalty |
2000.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative a) GRV Corp. of America, on or about 12/4/12: The employer has not developed an energy control program that consists of a procedure and training for employees who perform servicing and/or maintenance on equipment such as but not limited to: Baker Re-saws, a radial arm saw and chop saw. |
|
| Citation ID |
01005 |
| Citaton Type |
Serious |
| Standard Cited |
19100157 G01 |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-03-27 |
| Current Penalty |
800.0 |
| Initial Penalty |
1600.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) GRV Corp. of New York, on or about 10/24/12: Training was not provided to employees on the use of fire extinguishers and the hazards involved with incipient stage firefighting. *ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38(a) and .39(a) which includes the evacuation requirements of 29 CFR 1910.157(b). |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100178 L01 I |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-04-06 |
| Current Penalty |
600.0 |
| Initial Penalty |
1200.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) GRV Corp. of New York, on or about 12/4/12: Powered industrial truck operator was not provided with training. |
|
| Citation ID |
01007A |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-04-06 |
| Current Penalty |
1400.0 |
| Initial Penalty |
2800.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
2 |
| Nr Exposed |
7 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Saw Room, on or about 10/24/12: (2) Two Baker Resaw machines are not provided with point of operation guards. |
|
| Citation ID |
01007B |
| Citaton Type |
Serious |
| Standard Cited |
19100213 H01 |
| Issuance Date |
2013-03-04 |
| Abatement Due Date |
2013-03-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material: a) Saw Area, on or about 10/24/12: Radial arm saw was not provided with lower blade guards. |
|
| Citation ID |
01008A |
| Citaton Type |
Serious |
| Standard Cited |
19100219 D01 |
| Issuance Date |
2013-03-04 |
| Current Penalty |
600.0 |
| Initial Penalty |
1200.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
7 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): a) Saw Room, on or about 10/24/12: Dust collection blower had an unguarded pulley, thereby exposing employees to the in-running points where the belt meets the pulley. |
|
| Citation ID |
01008B |
| Citaton Type |
Serious |
| Standard Cited |
19100219 E01 I |
| Issuance Date |
2013-03-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(e)(1)(i): Horizontal belts which had both runs 42 inches or less from the floor level were not fully enclosed by guards conforming to requirements specified in 29 CFR 1910.219(m) and (o): a) Saw Room, on or about 10/24/12: Dust collection blower had an unguarded belt drive, thereby exposing employees to the in-running points of the belt and pulley. |
|
| Citation ID |
01008C |
| Citaton Type |
Serious |
| Standard Cited |
19100219 F03 |
| Issuance Date |
2013-03-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven 7 feet or less above floors or platforms were not enclosed. a) Saw Room, on or about 10/24/12: Chop saw had an unguarded chain drive that was less than 7 feet above the floor. |
|
| Citation ID |
01009 |
| Citaton Type |
Serious |
| Standard Cited |
19100242 B |
| Issuance Date |
2013-03-04 |
| Current Penalty |
800.0 |
| Initial Penalty |
1600.0 |
| Contest Date |
2013-03-27 |
| Final Order |
2013-08-12 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Assembly Area, on or about 10/24/12: Compressed air was used by employees for cleaning purposes at pressures greater than 100 p.s.i.. |
|
