|
342629995
|
0215600
|
2017-09-12
|
120-12 28TH AVENUE, FLUSHING, NY, 11354
|
|
| Inspection Type |
Referral
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2018-03-06
|
| Emphasis |
L: HHHT50, N: AMPUTATE, P: HHHT50
|
| Case Closed |
2018-08-13
|
Related Activity
| Type |
Referral |
| Activity Nr |
1256024 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
1257254 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C01 |
| Issuance Date |
2018-03-06 |
| Abatement Due Date |
2018-04-20 |
| Current Penalty |
6467.0 |
| Initial Penalty |
6467.0 |
| Final Order |
2018-04-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 The employer failed to develop a written energy control program for employees required to service and repair pneumatically and electrically powered equipment exposing employees to hazardous energy sources. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2018-03-06 |
| Abatement Due Date |
2018-04-20 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-04-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 The employer failed to conduct annual periodic inspections of energy control procedures used by employees during the servicing and repair of company equipment exposing employees to hazardous energy sources. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I |
| Issuance Date |
2018-03-06 |
| Abatement Due Date |
2018-04-20 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-04-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 The employer failed to provide employees effective hazardous energy recognition training exposing employees to hazardous energy sources during the servicing and repair of company equipment. WRITTEN ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100215 A02 |
| Issuance Date |
2018-03-06 |
| Abatement Due Date |
2018-03-30 |
| Current Penalty |
6467.0 |
| Initial Penalty |
6467.0 |
| Final Order |
2018-04-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(a)(2): Abrasive wheel(s) used on grinding machinery were not provided with safety guard(s) which covered the spindle end, nut, flange projections: A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 (Machine Shop) The abrasive wheel of a grinder used by employees during the manufacturing of metal aircraft parts was observed missing a safety guard exposing employees to amputation hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100215 B05 |
| Issuance Date |
2018-03-06 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-04-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(b)(5): The angular exposure of grinding wheel periphery and sides for safety guards used on surface grinding machine(s) employing the wheel periphery exceeded 150 degrees: A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 (Machine Shop) A grinding wheel used by employees during the manufacturing of metal aircraft parts was observed missing a guard. ABATEMENT CERTIFICATION IS NOT REQUIRED |
|
| Citation ID |
01002C |
| Citaton Type |
Serious |
| Standard Cited |
19100215 B09 |
| Issuance Date |
2018-03-06 |
| Abatement Due Date |
2018-03-30 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-04-03 |
| Nr Instances |
2 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(b)(9): Guard for abrasive wheel machine where the operator stands in front of the machine was not constructed so that the peripheral protecting member could be adjusted to the constantly decreasing diameter of the wheel: A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 (Machine Shop) The tongue guard of two (2) bench grinders used by employees during the manufacturing of metal aircraft parts was observed adjusted more than 1/4 inch from the grinding wheel exposing employees to flying particle hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100219 D01 |
| Issuance Date |
2018-03-06 |
| Abatement Due Date |
2018-03-30 |
| Current Penalty |
6467.0 |
| Initial Penalty |
6467.0 |
| Final Order |
2018-04-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 (Machine Shop) The vertical pulley of a grinding machine was observed not guarded exposing employees to amputation hazards. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100219 E03 I |
| Issuance Date |
2018-03-06 |
| Abatement Due Date |
2018-03-30 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-04-06 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(e)(3)(i): Vertical or inclined belt(s) were not enclosed by guard(s) conforming to the requirements specified at 29 CFR 1910.219(m) and (o): A.) On or about September 12, 2017 at 120-12 28th Avenue, Flushing, NY 11354 (Machine Shop) The vertical belt of a grinding machine was observed missing a guard exposing employees to amputation hazards. ABATEMENT CERTIFICATION IS NOT REQUIRED |
|
|
|
342572542
|
0215600
|
2017-08-23
|
120-12 28TH AVENUE, FLUSHING, NY, 11354
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
2017-08-23
|
| Emphasis |
L: HHHT50, P: HHHT50
|
| Case Closed |
2018-08-13
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1262999 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100132 D01 I |
| Issuance Date |
2018-02-20 |
| Abatement Due Date |
2018-03-16 |
| Current Penalty |
3880.0 |
| Initial Penalty |
3880.0 |
| Final Order |
2018-03-16 |
| Nr Instances |
1 |
| Nr Exposed |
18 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(d)(1)(i): The employer did not select, and have each affected employee use, the types of PPE that will protect the affected employee from the hazards identified in the hazard assessment; A) On or about August 23, 2017 at 120-12 28th Avenue, Flushing, NY11354 The employer did not ensure that employees were using gloves when working with hazardous chemicals such as but not limited to PR 1775 B2 Part A containing manganese dioxide, PR 1775 B2 Part B containing ethanethiol and MB-30-5, MB-30-55 and MB-30-330 Honing oil containing mineral oil to perform work duties. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100132 D02 |
| Issuance Date |
2018-02-20 |
| Abatement Due Date |
2018-03-16 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-03-16 |
| Nr Instances |
1 |
| Nr Exposed |
18 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(d)(2): The employer did not verify that the required workplace hazard assessment was performed through a written certification that identified the workplace evaluated; the person certifying that the evaluation had been performed; the date(s) of the hazard assessment; and, which identified the document as a certification of hazard assessment: A) On or about August 23, 2017 at 120-12 28th Avenue, Flushing, NY11354 The employer did not have a written workplace hazard assessment for assessing personal protective equipment such as gloves for employees using hazardous chemicals such as but not limited to PR 1775 B2 Part A containing manganese dioxide, PR 1775 B2 Part B containing ethanethiol and MB-30-5, MB-30-55 and MB-30-330 Honing oil containing mineral oil to perform work duties. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100132 F01 |
| Issuance Date |
2018-02-20 |
| Abatement Due Date |
2018-03-16 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-03-16 |
| Nr Instances |
1 |
| Nr Exposed |
18 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(f)(1): The employer did not provide training to each employee required to use personal protective equipment (PPE). Each such employee was not trained to know at least the requirements of 29 CFR 1910.132(f)(1)(i)-(v): A) On or about August 23, 2017 at 120-12 28th Avenue, Flushing, NY11354 The employer did not provide adequate training to employees on the use of gloves when using hazardous chemicals such as but not limited to PR 1775 B2 Part A containing manganese dioxide, PR 1775 B2 Part B containing ethanethiol and MB-30-5, MB-30-55 and MB-30-330 Honing oil containing mineral oil to perform work duties. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19101200 H01 |
| Issuance Date |
2018-02-20 |
| Abatement Due Date |
2018-04-06 |
| Current Penalty |
3880.0 |
| Initial Penalty |
3880.0 |
| Final Order |
2018-03-16 |
| Nr Instances |
1 |
| Nr Exposed |
18 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: A) On or about August 23, 2017 at 120-12 28th Avenue, Flushing, NY11354 The employer did not provide hazardous communication information and training to employees who used hazardous chemicals such as but not limited to PR 1775 B2 Part A containing manganese dioxide, PR 1775 B2 Part B containing ethanethiol and MB-30-5, MB-30-55 and MB-30-330 Honing oil containing mineral oil to perform work duties. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100134 K06 |
| Issuance Date |
2018-02-20 |
| Abatement Due Date |
2018-04-06 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2018-03-16 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(k)(6): The employer did not provide the basic advisory information on respirators, as presented in Appendix D of this section, in a written or oral format, to employees who wore respirators when such use was not required by this section or by the employer: A) On or about August 23, 2017, at 120-12 28th Avenue, Flushing NY 11354 The employer did not provide employees voluntarily wearing N95 dust masks to protect themselves against metal dusts with information from Appendix D of the Respiratory Protection Standard. ABATEMENT CERTIFICATION IS REQUIRED PURSUANT TO 29 CFR 1903.19 |
|
|
