Inspection Type |
Planned
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2014-01-16
|
Emphasis |
L: FALL, P: FALL
|
Case Closed |
2015-02-23
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19260095 A |
Issuance Date |
2014-02-18 |
Abatement Due Date |
2014-02-24 |
Current Penalty |
1000.0 |
Initial Penalty |
2000.0 |
Final Order |
2014-03-20 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.95(a): Personal protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, was not provided, used, or maintained in a sanitary and reliable condition it was necessary by reason of hazards of processes or environment, chemical hazards, radiological hazards, or mechanical irritants encountered in a manner capable of causing injury or impairment in the function of any part of the body through absorption, inhalation, or physical contact. a) Worksite - An employee installing shingles with a pneumatic nail gun was not wearing eye protection; on or about 01/16/13. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
Citation ID |
01002 |
Citaton Type |
Serious |
Standard Cited |
19260100 A |
Issuance Date |
2014-02-18 |
Abatement Due Date |
2014-02-24 |
Current Penalty |
600.0 |
Initial Penalty |
1200.0 |
Final Order |
2014-03-20 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.100(a): Employees working in areas where there was a possible danger of head injury from impact, or falling or flying objects, or from electrical shock and burns, were not protected by protective helmets: a) worksite - An employee working directly below ongoing roofwork was not wearing head protection; on or about 01/16/2014. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
Citation ID |
01003 |
Citaton Type |
Serious |
Standard Cited |
19260451 B05 I |
Issuance Date |
2014-02-18 |
Abatement Due Date |
2014-02-24 |
Current Penalty |
1000.0 |
Initial Penalty |
2000.0 |
Final Order |
2014-03-20 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.451(b)(5)(i): The end of a platform 10 feet or less in length, extended over its support more than 12 inches: a) worksite - An employee was working on a scaffold platform that extended approximately 18 inches over its support; on or about 01/16/2014. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
Citation ID |
01004 |
Citaton Type |
Serious |
Standard Cited |
19260451 G01 VII |
Issuance Date |
2014-02-18 |
Abatement Due Date |
2014-02-24 |
Current Penalty |
1400.0 |
Initial Penalty |
2800.0 |
Final Order |
2014-03-20 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. a) Worksite - An employee installing shingles approximately 20 feet 6 inches above the ground from an elevated work platform was not protected from falling; on or about 01/16/2014. Note: In addition to abatement certification the employer is required to submit abatement documentation for this item in accordance with 29 CFR 1903.19. |
|
Citation ID |
01005 |
Citaton Type |
Serious |
Standard Cited |
19261053 B01 |
Issuance Date |
2014-02-18 |
Abatement Due Date |
2014-02-24 |
Current Penalty |
1000.0 |
Initial Penalty |
2000.0 |
Final Order |
2014-03-20 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: a) worksite - Employees were using an unsecured ladder to access the upper landing. The ladders side rails were approximately 2 inches above the upper landing; on or about 01/16/2014. Note: The employer is required to submit abatement certification for this item in accordance with 29 CFR 1903.19. |
|
|