Inspection Type |
Prog Related
|
Scope |
Complete
|
Safety/Health |
Safety
|
Close Conference |
2014-04-09
|
Emphasis |
L: FALL, P: FALL
|
Case Closed |
2014-08-14
|
Violation Items
Citation ID |
01001A |
Citaton Type |
Serious |
Standard Cited |
19260501 B10 |
Issuance Date |
2014-06-13 |
Current Penalty |
0.0 |
Initial Penalty |
1600.0 |
Final Order |
2014-07-01 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels and 50-feet (15.25 m) wide or less, was not protected from falling by guardrail systems, safety net systems, or personal fall protection equipment. a) At the jobsite, on the roof, on or about 4/9/14: Workers were on a low slope roof with an approximate ground to eave height of 10 feet, without fall protection. |
|
Citation ID |
01001B |
Citaton Type |
Serious |
Standard Cited |
19260503 A01 |
Issuance Date |
2014-06-13 |
Abatement Due Date |
2014-07-18 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2014-07-01 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) At the jobsite, on the roof, on or about 4/9/14: Workers were on a low slope roof with an approximate ground to eave height of 10 feet, without fall protection and without being trained on hazards and protective measures associated with fall hazards. Abatement certification must be submitted for this item. |
|
Citation ID |
01002A |
Citaton Type |
Serious |
Standard Cited |
19261053 B04 |
Issuance Date |
2014-06-13 |
Current Penalty |
0.0 |
Initial Penalty |
1600.0 |
Final Order |
2014-07-01 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.1053(b)(4): Ladder(s) were used for purposes other than the purpose for which they were designed: a) At the jobsite, on the roof, on or about 4/9/14: An employee was working from a step ladder that was closed and leaned against the building and not as it was designed to be used. |
|
Citation ID |
01002B |
Citaton Type |
Serious |
Standard Cited |
19261060 A |
Issuance Date |
2014-06-13 |
Abatement Due Date |
2014-07-18 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2014-07-01 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards: a) At the jobsite, on or about 4/9/14: An employee was working from a step ladder that was closed and leaned against the building and not as it was designed to be used. This worker was not trained on safe use of ladders. Abatement certification must be submitted for this item. |
|
|