Search icon

J. LINDSLEY ROOFING, LLC

Company Details

Name: J. LINDSLEY ROOFING, LLC
Jurisdiction: New York
Legal type: DOMESTIC LIMITED LIABILITY COMPANY
Status: Active
Date of registration: 12 Dec 2007 (17 years ago)
Entity Number: 3604137
ZIP code: 13069
County: Oswego
Place of Formation: New York
Address: 1002 STATE ROUTE 176, FULTON, NY, United States, 13069

DOS Process Agent

Name Role Address
C/O JAMES LINDSLEY DOS Process Agent 1002 STATE ROUTE 176, FULTON, NY, United States, 13069

Filings

Filing Number Date Filed Type Effective Date
080215000800 2008-02-15 CERTIFICATE OF PUBLICATION 2008-02-15
071212000225 2007-12-12 ARTICLES OF ORGANIZATION 2007-12-12

OSHA's Inspections within Industry

Inspection Nr Report ID Date Opened Site Address
346686306 0215800 2023-05-08 8436 SLIVER SPRUCE CIRCLE, LIVERPOOL, NY, 13090
Inspection Type Complaint
Scope Partial
Safety/Health Safety
Close Conference 2023-05-08
Emphasis L: FALL

Related Activity

Type Inspection
Activity Nr 1668724
Safety Yes
Type Complaint
Activity Nr 2028728
Safety Yes

Violation Items

Citation ID 01001
Citaton Type Repeat
Standard Cited 19260501 B13
Issuance Date 2023-10-30
Current Penalty 12500.0
Initial Penalty 12500.0
Final Order 2023-12-27
Nr Instances 1
Nr Exposed 1
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) At the worksite, 8436 Silver Spruce Circle, Liverpool, NY 13090. On or about May 8, 2023, an employee was engaged in residential roofing activities on a roof with a 6:12 pitch, approximately 15 feet from eave to ground. The employee was not protected from falling by use of guardrail systems, safety net systems, or a personal fall arrest system. J. Lindsley Roofing, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard (1926.501(b)(13)), which was contained in OSHA inspection number 1615549, citation number 1, item number 1and was affirmed as a final order on (12-19-2022), with respect to a workplace located at 198 Balsam Street, Liverpool, NY 13088.
346155492 0215800 2022-08-18 198 BALSAM STREET, LIVERPOOL, NY, 13088
Inspection Type Prog Other
Scope Partial
Safety/Health Safety
Close Conference 2022-08-18
Emphasis L: FALL
Case Closed 2023-03-29

Related Activity

Type Inspection
Activity Nr 1634126
Safety Yes

Violation Items

Citation ID 01001
Citaton Type Serious
Standard Cited 19260501 B13
Issuance Date 2022-12-05
Current Penalty 2900.0
Initial Penalty 4144.0
Final Order 2022-12-19
Nr Instances 1
Nr Exposed 6
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.501(b)(13):Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) 198 Balsam Street, Liverpool, NY 13088: On or about August 18, 2022, employer failed to provide employees engaged in residential roofing activities on a 2-story house with guardrail systems, safety net system, or personal fall arrest system, nor were employees provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b).
Citation ID 01002
Citaton Type Serious
Standard Cited 19261053 B01
Issuance Date 2022-12-05
Current Penalty 2900.0
Initial Penalty 4144.0
Final Order 2022-12-19
Nr Instances 1
Nr Exposed 6
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: a) 198 Balsam Street, Liverpool, NY 13088: On or about August 18, 2022, employees were accessing the roof of a 2 story house, to perform residential roofing activities, using a ladder a ladder that had side rails that did not extend 3 feet beyond the access point.
340019967 0215800 2014-10-17 178 EDGEHILL RD, SYRACUSE, NY, 13224
Inspection Type Complaint
Scope Partial
Safety/Health Safety
Close Conference 2014-10-17
Emphasis L: FALL
Case Closed 2018-11-27

Related Activity

Type Complaint
Activity Nr 915465
Safety Yes

Violation Items

Citation ID 01001A
Citaton Type Serious
Standard Cited 19260416 A01
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 500.0
Initial Penalty 2200.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 3
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.416(a)(1): Employees were permitted to work in proximity to electric power circuits and were not protected against electric shock by de-energizing and grounding the circuits or effectively guarding the circuits by insulation or other means: a) Front of Structure at main electrical service entrance, On or about 10/17/14: Employees were working within three feet of the 240 service entrance. An aluminum rain gutter was laying across the energized conductors at the entrance to the structure. Abatement certification is required for this item.
Citation ID 01001B
Citaton Type Serious
Standard Cited 19260451 F06
Issuance Date 2014-12-01
Abatement Due Date 2014-12-09
Current Penalty 0.0
Initial Penalty 0.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 3
Related Event Code (REC) Complaint
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.451(f)(6): Scaffolds were erected, used, dismantled, altered, or moved such that they, or any conductive material handled on them, could have come closer than the minimum distances established for specific voltages as set forth in the table in subparagraph (f)(6): a) Front of Structure at main electrical service entrance, On or about 10/17/2014: A metal ladder jack bracket/platform approximately 16 feet in elevation was erected within 3 feet of the structures 240 volt main electrical service entrance. Abatement certification is required for this item.
Citation ID 01002
Citaton Type Serious
Standard Cited 19260451 B05 II
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 500.0
Initial Penalty 2200.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 2
Nr Exposed 4
Related Event Code (REC) Complaint
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.451(b)(5)(ii): The end of a platform greater than 10 feet in length extended over its support more than 18 inches and the platform was not designed and installed so that the cantilevered portion of the platform is able to support employees without tipping, or has guardrails which block employee access to the cantilevered end: a) Front of Roof, On or about 10/17/14: Employees were working on a roof jack platform which had sides extending over four feet past its end support. Employees were exposed to fall hazards of over 20 feet. b) Side of Roof, On or about 10/17/2014: Employees were working off of a ladder jack scaffold platform which had sides extending over four feet past both of its end supports. Abatement certification is required for this item.
Citation ID 01003
Citaton Type Serious
Standard Cited 19260451 E01
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 500.0
Initial Penalty 2200.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 2
Nr Exposed 4
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.451(e)(1): When scaffold platforms were more than 2 feet (0.6 m) above or below a point of access, portable ladders, hook-on ladders, attachable ladders, stair towers (scaffold stairways/towers), stairway-type ladders (such as ladder stands), ramps, walkways, integral prefabricated scaffold access, or direct access from other scaffold, structure, personnel hoist, or similar surface were not used: a) Front of Roof, On or about 10/17/14: Employees were accessing the ladder jack scaffold platform utilizing the supporting ladder which required the employees to climb over the platform they were accessing/ egressing. Employees were exposed to fall hazards of 18 feet. b) Side of Roof, On or about 10/17/2014: Employees were accessing the ladder jack platform utilizing the supporting ladder which required the employees to climb over the platform they were accessing/ egressing. Employees exposed to falls of 12 feet. Abatement certification is required for this item.
Citation ID 01004A
Citaton Type Serious
Standard Cited 19260452 N01
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 500.0
Initial Penalty 2200.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.452(n)(1): Scaffold platforms were placed higher than the second highest rung of the supporting ladder: a) Side of Roof, On or about 10/17/2014: Employees were working off of a scaffold platform which was supported by the top rung of an extension ladder. Abatement certification is required for this item.
Citation ID 01004B
Citaton Type Serious
Standard Cited 19260452 N03
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 0.0
Initial Penalty 0.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 2
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.452(n)(3): 29 CFR 1926.452(n)(3) : Ladders used to support step, platform, and trestle ladder scaffolds were not placed, fastened, or equipped with devices to prevent slipping. a) Side of Roof, On or about 10/17/2014: Employees were working off of a scaffold platform which was supported by an extension ladder which was not secured to prevent slipping. Abatement certification is required for this item.
Citation ID 02001A
Citaton Type Repeat
Standard Cited 19260404 B01 II
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 1000.0
Initial Penalty 4400.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 9
Related Event Code (REC) Complaint
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.404(b)(1)(ii): Employer did not use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section, or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites: a) Worksite- On or about 10/17/14: Employees were utilizing electrical equipment, such as a Dewalt circular saw and a battery charging equipment. There was no ground fault circuit interrupters, or assured equipment grounding conductor program in use. Abatement documentation required for this item. J. Lindsley Roofing, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.404(b)(1)(ii) which was contained in OSHA inspection number 965920, citation number 1, item number 4b and was affirmed as a final order on 5/1/2014, with respect to a workplace located at 1002 State Route 176 Fulton, NY 13069.
Citation ID 02001B
Citaton Type Repeat
Standard Cited 19260404 F06
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 0.0
Initial Penalty 0.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 1
Related Event Code (REC) Complaint
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) At the jobsite, On or about 10/17/14: A Dewalt circular saw was used without a continuous path to ground. Abatement documentation required for this item. J. Lindsley Roofing, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.404(f)(6) which was contained in OSHA inspection number 965920, citation number 1, item number 4c and was affirmed as a final order on 5/1/2014, with respect to a workplace located at 1002 State Route 176 Fulton, NY 13069.
Citation ID 02002
Citaton Type Repeat
Standard Cited 19260501 B13
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 1000.0
Initial Penalty 4400.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 3
Related Event Code (REC) Complaint
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) Roof, On or about 10/17/14: Employees were working on a high pitched residential roof with out utilizing any fall protection. Employees were exposed to falls of over 18 feet. Abatement documentation is required for this item. J. Lindsley Roofing, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.501(b)(10), which was contained in OSHA inspection number 965920, citation number 1, item number 3a and was affirmed as a final order on 5/1/2014, with respect to a workplace located at 1002 State Route 176 Fulton, NY 13069.
Citation ID 02003
Citaton Type Repeat
Standard Cited 19261053 B01
Issuance Date 2014-12-01
Abatement Due Date 2014-12-11
Current Penalty 1000.0
Initial Penalty 4400.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 2
Nr Exposed 4
Related Event Code (REC) Complaint
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: a) Front of Roof, On or about 10/17/14: Employees were accessing the roof from a ladder jack scaffold platform. The ladder did not extend three feet past the eave. Employees were exposed to fall hazards of 18 feet. b) Side of Roof, On or about 10/17/2014: Employees were accessing the roof from a ladder jack/ supported scaffold platform. The ladder did not extend past the eave. Employees exposed to falls of 12 feet. Abatement documentation is required for this item. J. Lindsley Roofing, LLC was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1926.1053(b)(1), which was contained in OSHA inspection number 965920, citation number 1, item number 3b and was affirmed as a final order on 5/1/2014, with respect to a workplace located at 1002 State Route 176 Fulton, NY 13069.
Citation ID 03001
Citaton Type Other
Standard Cited 19260503 B01
Issuance Date 2014-12-01
Abatement Due Date 2014-12-14
Current Penalty 0.0
Initial Penalty 0.0
Contest Date 2014-12-10
Final Order 2015-06-11
Nr Instances 1
Nr Exposed 9
Related Event Code (REC) Complaint
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.503(b)(1): The employer did not verify compliance with paragraph (a) of this section by preparing a written (training) certification record including the name or other identity of the employee trained, the date(s) of the training, and the signature of the person who conducted the training or the signature of the employer. a) At the jobsite, On or about 10/17/2014: Employees were exposed to fall hazards. The company had not documented/ certified any fall protection training for employees. Abatement certification required for this item.
Citation ID 04001
Citaton Type Other
Standard Cited 19030019 C01
Issuance Date 2015-09-09
Abatement Due Date 2015-09-28
Current Penalty 440.0
Initial Penalty 440.0
Final Order 2015-11-03
Nr Instances 1
Nr Exposed 4
FTA Current Penalty 0.0
Citation text line 29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: a) At the jobsite, on or about 9/9/2015: The employer did not provide abatement certification for Citation 01, Items 001a, 001b, 002, 003, 004a 004b, Citation 02, Items 001a, 001b, 002, 003 and Citation 03, Item 001 issued on December 1, 2015. An abatement demand letter was sent to the employer on August 3, 2015. Abatement certification is required for this item.
339659203 0215800 2014-04-02 STAR NAIL SALON, 109 EAST BROADWAY, FULTON, NY, 13069
Inspection Type Complaint
Scope Complete
Safety/Health Safety
Close Conference 2014-04-02
Emphasis L: FALL
Case Closed 2019-02-28

Related Activity

Type Complaint
Activity Nr 879249
Safety Yes
Health Yes

Violation Items

Citation ID 01001A
Citaton Type Serious
Standard Cited 19260028 A
Issuance Date 2014-04-18
Abatement Due Date 2014-04-28
Current Penalty 1120.0
Initial Penalty 1600.0
Final Order 2014-05-01
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.28(a): The employer did not require the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions: a) Entire roof, on or about 4-2-14: Five employees were working with adhesives, mastics, and sealants, without the PPE required to protect hands and exposed skin.
Citation ID 01001B
Citaton Type Serious
Standard Cited 19260059
Issuance Date 2014-04-18
Abatement Due Date 2014-04-28
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-05-01
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.59: 29 CFR 1926.59: An employer engaged in construction activities did not comply with the requirements set forth in Part 1910, Section 1200, Hazard Communication: a) Entire worksite, on or about 4-2-14: Five employees were working with adhesives, mastics, and sealants, without a hazard communication program or MSDS sheets available.
Citation ID 01001C
Citaton Type Serious
Standard Cited 19260102 A01
Issuance Date 2014-04-18
Abatement Due Date 2014-04-28
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-05-01
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury from physical, chemical, or radiation agents: a) Entire roof, on or about 4-2-14: Five employees were working with adhesives, mastics, and sealants, without eye protection.
Citation ID 01002
Citaton Type Serious
Standard Cited 19260150 C01 VI
Issuance Date 2014-04-18
Abatement Due Date 2014-04-28
Current Penalty 0.0
Initial Penalty 2000.0
Final Order 2014-05-01
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.150(c)(1)(vi): A fire extinguisher, rated not less than 10B, was not provided within 50 feet of wherever more than 5 gallons of flammable or combustible liquids or 5 pounds of flammable gas were being used on the jobsite: a) Entire roof, on or about 4-2-14: Five employees were using flammable liquids (adhesive) while working on a roof, without a fire extinguisher.
Citation ID 01003A
Citaton Type Serious
Standard Cited 19260501 B10
Issuance Date 2014-04-18
Abatement Due Date 2014-04-28
Current Penalty 1400.0
Initial Penalty 2000.0
Final Order 2014-05-01
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.501(b)(10): Each employee engaged in roofing activities on low-slope roofs with unprotected sides and edges 6 feet or more above lower levels, was not protected from falling by guardrail systems, safety net systems, personal fall arrest systems, or a combination of warning line system and guardrail system, warning line system and safety net system, or warning line system and personal fall arrest system, or warning line system and safety monitoring system. Or, on roofs 50-feet (15.25 m) or less in width, each employee was not protected by use of a monitoring system: a) Entire roof, on or about 4-2-14: Five employees were working on a flat roof and were not protected from falls, exposing the employees to a fall hazard of 20 feet 6 inches.
Citation ID 01003B
Citaton Type Serious
Standard Cited 19261053 B01
Issuance Date 2014-04-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-05-01
Nr Instances 1
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.1053(b)(1): Portable ladders were used for access to an upper landing surface and the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface to which the ladder was used to gain access: a) West side of building, on or about 4-2-14: Employees were accessing the roof via an extension ladder that was extended 25 inches above the landing surface, exposing the employees to a fall hazard of 9 feet.
Citation ID 01004A
Citaton Type Other
Standard Cited 19260403 B02
Issuance Date 2014-04-18
Current Penalty 0.0
Initial Penalty 1600.0
Final Order 2014-05-01
Nr Instances 2
Nr Exposed 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: a) Northwest side of building, on or about 4-2-14: Employees were operating power tools and equipment that were plugged into a relocatable power tap (RPT) that was not being used in accordance with the manufacturers recommendations or as listed and labeled. b) North side of building, inside, on or about 4-2-14: Employees were operating power tools and equipment that were plugged into a relocatable power tap (RPT) that was not being used in accordance with the manufacturers recommendations or as listed and labeled.
Citation ID 01004B
Citaton Type Serious
Standard Cited 19260404 B01 II
Issuance Date 2014-04-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-05-01
Nr Instances 2
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupters for personal protection: a) Northwest side of building, on or about 4-2-14: Employees were operating power tools and equipment that were powered through a receptacle that was not protected by a ground fault circuit interrupter (GFCI). b) North side of building, inside, on or about 4-2-14: Employees were operating power tools and equipment that were powered through a receptacle that was not protected by a ground fault circuit interrupter (GFCI).
Citation ID 01004C
Citaton Type Serious
Standard Cited 19260404 F06
Issuance Date 2014-04-18
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2014-05-01
Nr Instances 2
Nr Exposed 5
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) Northwest corner of building, on or about 4-2-14: Employees were operating power tools and equipment that were plugged into two cords that did not have a continuous path to ground due to missing ground pins.
309384766 0215800 2006-11-17 RTE 48, FULTON, NY, 13069
Inspection Type Referral
Scope Partial
Safety/Health Health
Close Conference 2006-12-21
Emphasis L: FALL
Case Closed 2008-08-25

Related Activity

Type Referral
Activity Nr 200886141
Safety Yes
Health Yes

Violation Items

Citation ID 01001
Citaton Type Serious
Standard Cited 19260416 E01
Issuance Date 2007-01-09
Abatement Due Date 2007-01-12
Current Penalty 600.0
Initial Penalty 600.0
Nr Instances 1
Nr Exposed 3
Gravity 02
Citation ID 01002
Citaton Type Serious
Standard Cited 19260602 C01 VII
Issuance Date 2007-01-09
Abatement Due Date 2007-01-27
Current Penalty 600.0
Initial Penalty 600.0
Nr Instances 1
Nr Exposed 2
Related Event Code (REC) Referral
Gravity 02
Citation ID 02001A
Citaton Type Other
Standard Cited 19101200 E01
Issuance Date 2007-01-09
Abatement Due Date 2007-02-11
Nr Instances 1
Nr Exposed 4
Related Event Code (REC) Referral
Gravity 02
Citation ID 02001B
Citaton Type Serious
Standard Cited 19101200 G01
Issuance Date 2007-01-09
Abatement Due Date 2007-02-11
Nr Instances 1
Nr Exposed 4
Gravity 02
Citation ID 02001C
Citaton Type Other
Standard Cited 19101200 H01
Issuance Date 2007-01-09
Abatement Due Date 2007-02-11
Nr Instances 1
Nr Exposed 4
Gravity 02

Paycheck Protection Program

Loan Number Loan Funded Date SBA Origination Office Code Loan Delivery Method Borrower Street Address
9699227005 2020-04-09 0248 PPP 1002 state route 176, FULTON, NY, 13069
Loan Status Date 2021-10-09
Loan Status Paid in Full
Loan Maturity in Months 24
SBA Guaranty Percentage 100
Loan Approval Amount (at origination) 80000
Loan Approval Amount (current) 80000
Undisbursed Amount 0
Franchise Name -
Lender Location ID 49989
Servicing Lender Name NBT Bank, National Association
Servicing Lender Address 52 S Broad St, NORWICH, NY, 13815-1646
Rural or Urban Indicator R
Hubzone N
LMI N
Business Age Description Existing or more than 2 years old
Project Address FULTON, OSWEGO, NY, 13069-0001
Project Congressional District NY-24
Number of Employees 12
NAICS code 238160
Borrower Race Unanswered
Borrower Ethnicity Unknown/NotStated
Business Type Limited Liability Company(LLC)
Originating Lender ID 49989
Originating Lender Name NBT Bank, National Association
Originating Lender Address NORWICH, NY
Gender Unanswered
Veteran Unanswered
Forgiveness Amount 81058.63
Forgiveness Paid Date 2021-08-17
6840238305 2021-01-27 0248 PPS 1002 State Route 176, Fulton, NY, 13069-4790
Loan Status Date 2022-04-08
Loan Status Paid in Full
Loan Maturity in Months 60
SBA Guaranty Percentage 100
Loan Approval Amount (at origination) 120000
Loan Approval Amount (current) 120000
Undisbursed Amount 0
Franchise Name -
Lender Location ID 49989
Servicing Lender Name NBT Bank, National Association
Servicing Lender Address 52 S Broad St, NORWICH, NY, 13815-1646
Rural or Urban Indicator R
Hubzone N
LMI N
Business Age Description Existing or more than 2 years old
Project Address Fulton, OSWEGO, NY, 13069-4790
Project Congressional District NY-24
Number of Employees 12
NAICS code 238160
Borrower Race Unanswered
Borrower Ethnicity Unknown/NotStated
Business Type Limited Liability Company(LLC)
Originating Lender ID 49989
Originating Lender Name NBT Bank, National Association
Originating Lender Address NORWICH, NY
Gender Unanswered
Veteran Unanswered
Forgiveness Amount 121374.25
Forgiveness Paid Date 2022-03-24

Date of last update: 28 Mar 2025

Sources: New York Secretary of State