| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2014-07-29
|
| Emphasis |
L: FALL, P: FALL
|
| Case Closed |
2015-01-07
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19260453 B02 V |
| Issuance Date |
2014-09-05 |
| Current Penalty |
1200.0 |
| Initial Penalty |
2000.0 |
| Final Order |
2014-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.453(b)(2)(v): A body belt or safety harness with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: a) North side of building, on or about 7-29-14: Two employees were working in an articulating, extensible boom, aerial lift, without a safety harness or body belt connected, exposing the employees to a fall hazard of 40 feet. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19260501 B13 |
| Issuance Date |
2014-09-05 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.501(b)(13): Each employee(s) engaged in residential construction activities 6 feet (1.8 m) or more above lower levels were not protected by guardrail systems, safety net system, or personal fall arrest system, nor were employee(s) provided with an alternative fall protection measure under another provision of paragraph 1926.501 (b): a) North side of building, on or about 7-29-14: Two employees were working on a sloped roof and were not protected from falls, exposing the employees to a fall hazard of 18 feet. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19260503 A01 |
| Issuance Date |
2014-09-05 |
| Abatement Due Date |
2014-09-20 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.503(a)(1): The employer did not provide a training program for each employee potentially exposed to fall hazards to enable each employee to recognize the hazards of falling and the procedures to be followed in order to minimize these hazards: a) North side of building, on or about 7-29-14: One employee was working on a sloped roof without the training necessary for the employee to recognize the hazards associated with falls and their work, exposing the employees to a fall hazard of 17 feet. |
|
| Citation ID |
02001A |
| Citaton Type |
Other |
| Standard Cited |
19260404 F06 |
| Issuance Date |
2014-09-05 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.404(f)(6): The path to ground from circuits, equipment, or enclosures was not permanent and continuous: a) North side of building, on or about 7-29-14: Employees were operating various power tools and a compressor that was plugged into a power source that did not have a continuous path to ground due to a missing ground pin. |
|
| Citation ID |
02001B |
| Citaton Type |
Other |
| Standard Cited |
19260405 G02 IV |
| Issuance Date |
2014-09-05 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.405(g)(2)(iv): Flexible cords were not connected to devices and fittings so that strain relief is provided to prevent pull from being directly transmitted to joints or terminal screws: a) North side of building, on or about 7-29-14: Employees were using an air compressor with a cord that exhibited a broken strain relief. |
|
|
