| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2018-08-15
|
| Case Closed |
2019-10-11
|
Related Activity
| Type |
Referral |
| Activity Nr |
1358723 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100095 B01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2020-02-19 |
| Current Penalty |
4000.0 |
| Initial Penalty |
9977.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(b)(1): Employees were subjected to sound levels exceeding those listed in Table G-16 of Subpart G of 29 CFR 1910 and feasible administrative or engineering controls were not utilized to reduce sound levels: a) Wash Room, on or about 8/15/18: A Production Employee working in the Wash Room was exposed to continuous noise at a level of 331% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 331% dose is approximately 98.6dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 446 minutes. Exposure calculations include a zero increment for the 34 minutes not sampled. Empoloyee was wearing ear plugs. Engineering controls were not used to reduce noise levels. a) Wash Room, on or about 8/15/18: A Production Employee working in the Wash Room was exposed to continuous noise at a level of 371% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 371% dose is approximately 99.5 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 448 minutes. Exposure calculations include a zero increment for the 32 minutes not sampled. Empoloyee was wearing ear plugs. Engineering controls were not used to reduce noise levels. Abatement Note: A feasible form of an engineering control includes, but is not limited to: enclosing the blowers on the dishwasher |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100095 I02 I |
| Issuance Date |
2018-10-02 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(i)(2)(i): The wearing of hearing protectors was not ensured for employees exposed to sound levels exceeding those listed in Table G16 of 29 CFR 1910.95 as required by 29 CFR 1910.95(b)(1): a) Wash Room, on or about 8/15/18: A Production Employee working in the Wash Room was exposed to continuous noise at a level of 331% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 331% dose is approximately 98.6dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 446 minutes. Exposure calculations include a zero increment for the 34 minutes not sampled. Employee was wearing ear plugs on 8/15/18 however, employee was observed not wearing hearing protection on 7/11/18. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100095 C01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2020-02-19 |
| Current Penalty |
4000.0 |
| Initial Penalty |
9977.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
7 |
| Nr Exposed |
24 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(c)(1): A continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (n) was not instituted when employee noise exposures equaled or exceeded an 8 hour time-weighted average sound level (TWA) of 85 dBA: a) Wash Room, on or about 8/15/18: A Production Employee working in the Wash Room was exposed to continuous noise at a level of 331% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 331% dose is approximately 98.6dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 446 minutes. Exposure calculations include a zero increment for the 34 minutes not sampled. Employee was wearing ear plugs. b) Wash Room, on or about 8/15/18: A Production Employee working in the Wash Room was exposed to continuous noise at a level of 371% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 371% dose is approximately 99.5 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 448 minutes. Exposure calculations include a zero increment for the 32 minutes not sampled. Employee was wearing ear plugs. c) Red Room, on or about 8/15/18: A Packaging Employee working in the Red Room was exposed to continuous noise at a level of 106.3% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 106.3% dose is approximately 90.4 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 468 minutes. Exposure calculations include a zero increment for the 12 minutes not sampled. Employee was wearing ear plugs. d) Red Room, on or about 8/15/18: A Packaging Employee working in the Red Room was exposed to continuous noise at a level of 107.6% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 107.6% dose is approximately 90.5 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 468 minutes. Exposure calculations include a zero increment for the 12 minutes not sampled. Employee was wearing ear plugs. e) Filling Room, on or about 8/15/18: A Production Employee working in the Filling Room was exposed to continuous noise at a level of 79.6% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 79.6% dose is approximately 88.4 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 449 minutes. Exposure calculations include a zero increment for the 31 minutes not sampled. Employee was wearing ear plugs. f) Filling Room, on or about 8/15/18: A Production Employee working in the Filling Room was exposed to continuous noise at a level of 98.7% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 98.7% dose is approximately 89.3 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 456 minutes. Exposure calculations include a zero increment for the 24 minutes not sampled. Employee was wearing ear plugs. g) Final Scramble & Loader Area, on or about 8/15/18: A Production Employee working in the Final Scramble & Loader Area was exposed to continuous noise at a level of 119.2% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 119.2% dose is approximately 91.2 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 8/15/18 for 443 minutes. Exposure calculations include a zero increment for the 37 minutes not sampled. Employee was wearing ear plugs. Abatement methodology: Step 1: An effective hearing conservation program in accordance with 29 CFR 1910.95(c) through (n) shall be maintained. An effective hearing conservation program shall include, at a minimum: (1) A baseline audiogram for all employees exposed to noise levels equal to or in excess of the standard. (2) Annual audiograms for each overexposed employee. (3) analysis of audiogram results with retesting and/or referral to an otolaryngologist or qualified physician when a significant threshold shift occurs. A significant shift will be considered to be equal to or greater than an average of 30 dba over the 2000, 3000, and 4000 hertz frequencies. (4) Where insert ear plugs or custom-molded devices are utilized, individual employee fitting shall be conducted by a trained person, and employees shall be instructed in the care and use of the devices. |
|
|
| Inspection Type |
Referral
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2018-07-11
|
| Emphasis |
N: AMPUTATE, P: AMPUTATE
|
| Case Closed |
2020-02-12
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1329529 |
| Safety |
Yes |
|
| Type |
Referral |
| Activity Nr |
1354869 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100022 C |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
7317.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(c): The employer did not provide, and ensure each employee used, a safe means of access and egress to and from walking-working surfaces: a) On or about 7/11/2018, Bagging Area: Stair treads leading to the scrambled egg elevator platform were not secured to prevent displacement. Abatement certification is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100025 C01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-09-15 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.25(c)(1): The employer did not ensure that stairs were installed at angles between 30 to 50 degrees from the horizontal: a) On or about 7/11/2018, Bagging Area: Stair treads leading to the scrambled egg elevator platform were installed at an angle of 67 degrees to the horizon. Abatement certification is required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100025 C03 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-09-15 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.25(c)(3): 29 CFR 1910.25(c)(3): The employer did not ensure stairs have a minimum tread depth of 9.5 inches (24 cm). a) On or about 7/11/2018, Bagging Area: Stair treads leading to the scrambled egg elevator platform had a tread depth of six inches. Abatement certification is required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100037 A03 |
| Issuance Date |
2018-10-02 |
| Current Penalty |
3500.0 |
| Initial Penalty |
7317.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
2 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: a) On or about 7/11/2018, Loading Room: An exit route was partially blocked by ladders, cleaning chemicals and totes. b) On or about 7/11/2018, Packing Room: An exit route was blocked by boxes, pallets, and buckets. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100132 D01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
7317.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(d)(1): The employer did not assess the workplace to determine if hazards are present, or are likely to be present, which necessitate the use of personal protective equipment (PPE): a) On or about 7/11/2018, Throughout the facility: The employer had not assessed the workplace to determine what hazards were present and what PPE was needed. Employees were utilizing and exposed to caustic and corrosive chemicals such as, but not limited to cleaning chemicals . Employees were also exposed to steam pipes which were lacking insulation. No PPE was provided to ensure that employees were protected from thermal burns, or in the alternative, insulate the steam pipes. Abatement certification is required for this item. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100133 A01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee uses appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation: a) On or about 7/11/2018, Throughout the facility: Employees were not utilizing eye and face protection while dispensing and using cleaning chemicals. Abatement certification is required for this item. |
|
| Citation ID |
01003C |
| Citaton Type |
Serious |
| Standard Cited |
19100138 A |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
2 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.138(a): The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes: a) On or about 7/11/2018, Throughout the facility: Employees were exposed to hand injuries due to coming into contact with chemicals such as, but not limited to cleaning chemicals. b) On or about 7/11/2018, In the Loading Room: Employees were also exposed to steam pipes which were lacking insulation. No PPE was provided to ensure that employees were protected from thermal burns, or in the alternative, insulate the steam pipes. Abatement certification is required for this item. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100151 C |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
9147.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
14 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.151(c): Where employees were exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body were not provided within the work area for immediate emergency use: a) On or about 7/11/2018, Pan Room: Employees were dispensing corrosive chemicals. There was no operable eye wash in the area. The plumbed eye wash was inoperable, and the portable eye wash was lacking liquid. Abatement certification is required for this item. |
|
| Citation ID |
01005 |
| Citaton Type |
Serious |
| Standard Cited |
19100178 L01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
5488.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(1): The employer did not ensure that each power industrial truck operator was competent to operate a power industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in paragraph (1): a) On or about 7/11/2018, Throughout the facility: Employees which are required to operate powered industrial trucks are not provided with powered industrial truck training. Abatement certification is required for this item. |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
10975.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
10 |
| Nr Exposed |
20 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) On or about 7/11/2018, Peeler Room: An egg conveying past the Sanovo Peeler system was not provided with fixed guards to prevent employees from coming into contact with shear points. b) On or about 7/11/2018, Peeler Room: The flex loader belt had an unguarded pinch point created by belt transitions. c) On or about 7/11/2018, Loading Room: An emergency stop switch for an auger system was missing its emergency stop button. d) On or about 7/11/2018, Loading Room: An opening into an auger system was not provided with secured guard, employees exposed to a rotating auger. e) On or about 7/11/2018, Peeler Room: An inclined auger being fed from the Peeler had a portion of exposed rotating auger. f) On or about 7/11/2018, Loading Room: An opening into an auger system was not guarded, employees exposed to a rotating auger. g) On or about 7/11/2018, Peeler Room: The De-Escalator belt and roller had an unguarded pinch point. h) On or about 7/11/2018, Pan Wash Area: A pan elevator had guards removed, exposing employees to moving parts. i) On or about 7/11/2018, Bagging Area: A cover was off on the bucket elevator, exposing moving parts in the elevator. j) On or about 7/11/2018, Kitchen Area: A guard was removed from the end of the scrambled egg pan dump, employees exposed to moving pans. Abatement certification is required for these items. |
|
| Citation ID |
01007 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C04 I |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
5488.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
2 |
| Nr Exposed |
10 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(4)(i): Unguarded projecting shaft end(s) did not present a smooth edge and end and projected more than one half the diameter of the shaft: a) On or about 7/11/2018, Loading Room: A 1.5 inch diameter rotating shaft associated with an egg shell auger extended 2.25 inches, no guarding was in place. b) On or about 7/11/2018, Peeling Room: A 1.5 inch diameter rotating shaft with a protruding set screw extended 1.5 inches with no guard. This shaft extended from an egg auger. Abatement certification is required for these items. |
|
| Citation ID |
01008 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 F03 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
7317.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
3 |
| Nr Exposed |
10 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(f)(3): Sprocket wheels and chains which were seven -7 feet or less above floors or platforms were not enclosed: a) On or about 7/11/2018, Scrambled Egg Room: A chain and sprocket at the feed end of the pan loader was not guarded. b) On or about 7/11/2018, Bagging Area: A chain and sprocket on the egg elevator was not guarded. c) On or about 7/11/2018, Bagging Area: A chain and two sprockets were not adequately guarded, as the existing guard was damaged. Abatement certification is required for these items. |
|
| Citation ID |
01009 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 G02 I |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
9147.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): a) On or about 7/11/2018, Bagging Area: An employee was required to reach into an energized panel, while there was exposed energized parts. Abatement certification is required for this item. |
|
| Citation ID |
01010A |
| Citaton Type |
Serious |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.0 |
| Initial Penalty |
7317.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) On or about 7/11/2018, Throughout the facility: Employees are exposed to and utilizing numerous chemicals including, but not limited to AFCO 5339 SA Super Power Foam CL and AFCO 5237 Super Alk. The company had not developed, implemented, and maintained a written Hazard Communication Program. Abatement certification is required for this item. |
|
| Citation ID |
01010B |
| Citaton Type |
Serious |
| Standard Cited |
19101200 H01 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) On or about 7/11/2018, Throughout the facility: Employees are exposed to and utilizing numerous chemicals including, but not limited to AFCO 5339 SA Super Power Foam CL and AFCO 5237 Super Alk. The company had not provided training in regards to the hazards associated with the chemicals that the employees were utilizing, Safety Data Sheets, and regarding a hazard communication program. Abatement certification is required for this item. |
|
| Citation ID |
02001A |
| Citaton Type |
Repeat |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
3500.5 |
| Initial Penalty |
25609.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Related Event Code (REC) |
Accident |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) On or about 7/11/2018, Throughout the facility: Employees were performing maintenance operations, clearing jambs, and cleaning equipment without utilizing lock out procedures. This included cleaning all production equipment, changing suction cups on the egg transfer machine and clearing eggs from the egg peeler conveyor. Abatement documentation is required for this item. Deb El Food Products, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(4)(i), which was contained in OSHA inspection number 1269019, citation number 1, item number 1b and was affirmed as a final order on 12/27/2017, with respect to a workplace located at 35 West State Street, Sherburne, NY and also contained in OSHA inspection number 1207522, citation number 1, item number 1 and was affirmed as a final order on 6/16/2017, with respect to a workplace located at 35 West State Street, Sherburne, NY |
|
| Citation ID |
02001B |
| Citaton Type |
Repeat |
| Standard Cited |
19100147 C07 I |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that the purpose and function of the energy control program was understood by employees: a) On or about 7/11/2018, Throughout the facility: Employees were performing maintenance operations, clearing jambs, and cleaning equipment without utilizing lock out procedures. This included cleaning all production equipment, changing suction cups on the egg transfer machine and clearing eggs from the egg peeler conveyor. Lockout training was not provided to authorized and effected employees. Abatement documentation is required for this item. Deb El Food Products, Inc. was previously cited for a violation of this occupational safety and health standard or its equivalent standard 1910.147(c)(47(i)(A), which was contained in OSHA inspection number 1269019, citation number 1, item number 1c and was affirmed as a final order on 12/27/2017, with respect to a workplace located at 35 West State Street, Sherburne, NY. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19040039 A02 |
| Issuance Date |
2018-10-02 |
| Current Penalty |
3500.0 |
| Initial Penalty |
4500.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1904.39(a)(2): The employer did not report within 24-hours a work-related incident resulting in in-patient hospitalization, amputation or the loss of an eye: a) On or about 7/11/2018, In the facility: An employee received a finger tip amputation on 6/26/2018 at approximately 3:30 PM. The incident was not reported until 7/3/2018 at approximately 10:12 AM. Abatement certification is required for this item. |
|
| Citation ID |
03002 |
| Citaton Type |
Other |
| Standard Cited |
19100022 A02 |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(a)(2): Floor(s) of workroom(s) were not maintained, so far as possible, in a dry condition: a) On or about 7/11/2018, Loading Room: The shell drainage bucket overflowed to the walking surface by design. Abatement certification is required for this item. |
|
| Citation ID |
03003 |
| Citaton Type |
Other |
| Standard Cited |
19100028 B03 II |
| Issuance Date |
2018-10-02 |
| Abatement Due Date |
2018-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2018-10-22 |
| Final Order |
2019-07-15 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.28(b)(3)(ii): Each employee was not protected from tripping into floor holes: a) On or about 7/11/2018, Loading Room: A floor hole was not covered with a grate. Abatement certification is required for this item. |
|
|
