| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100036 D01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-10 |
| Current Penalty |
7000.0 |
| Initial Penalty |
7000.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.36(d)(1): Employee(s) were not able to open an exit route door from the inside at all times without keys, tools, or special knowledge: (a) Exit in the Delivery Bay - A retractable metal gate was closed and locked rendering the exit unusable; on or about 02/11/14. NOTE: IN ADDITION TO ABATEMENT CERTIFICATION, THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT DOCUMENTATION FOR THIS ITEM, FAILURE TO COMPLY WILL RESULT IN AN ADDITIONAL PENALTY OF $ 1,000.00 AS PER 29 CFR 1903.19. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100036 G04 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-14 |
| Current Penalty |
0.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
" 29 CFR 19.10.36 (g)(4) : Stored objects were allowed to project into the exit route, reducing the width of the exit route to less than the minimum width requirements for exit routes; (a. Props used for displays were stored too closely to the exit door, limiting the required clearance from 28" to 25". 29 CFR 1910.36(g)(4): (NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19 |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100037 A03 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-14 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(a)(3): Exit route(s) were not kept free and unobstructed: (a) Exit in the Delivery Bay Exit access was blocked by stored materials; on or about 02/11/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19 |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100107 G02 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-10 |
| Current Penalty |
0.0 |
| Initial Penalty |
3000.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.107(g)(2): Cleaning. All spraying areas shall be kept as free from the accumulation of deposits of combustible residues as practical, with cleaning conducted daily if necessary. Scrapers, spuds, or other such tools used for cleaning purposes shall be of nonsparking material. (a) In the Spray Booth - Combustible residues accumulated on the sides of the spray booth; on or about 02/11/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19 |
|
| Citation ID |
01004A |
| Citaton Type |
Serious |
| Standard Cited |
19100213 D01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-10 |
| Current Penalty |
6000.0 |
| Initial Penalty |
5000.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(d)(1): Each circular crosscut table saw shall be guarded by a hood which shall meet all the requirements of paragraph (c)(1) of this section for hoods for circular ripsaws. (a) The production area - A Rockwell-Delta 12/14 tilting arbor saw used to cut 3 inch wide plywood strips did not have a self-adjusting hood; on or about 02/11/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19 |
|
| Citation ID |
01004B |
| Citaton Type |
Serious |
| Standard Cited |
19100213 H01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-14 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock; (a) In the Production Area - A DeWalt Radial Saw was not provided with a guard for the lower portion of the blade; on or about 2/11/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19 |
|
| Citation ID |
01005 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-14 |
| Current Penalty |
3000.0 |
| Initial Penalty |
3000.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
2 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(1): Temporary electrical power and lighting installation(s) 600 volts, nominal, or less were used in prohibited manners: (a) In the Production and Finishing Areas - Extension cords were used to power numerous ballasts for overhead fluorescent lights; on or about 02/11/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19 |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19030002 A01 |
| Issuance Date |
2014-03-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
1000.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1903.2(a)(1): The Employer did not post in a conspicuous place or where notices are customarily posted, a notice furnished by the Occupational Safety and Health Administration informing employees of the protections and obligations provided for in the OSH Act: a) In the Workplace; on or about 02/11/14. |
|
| Citation ID |
02002A |
| Citaton Type |
Other |
| Standard Cited |
19100134 C02 II |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-28 |
| Current Penalty |
1000.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
(a) on or about 2/11/14, employees in the workshop used by the Visual Team to produce displays were provided respirators for voluntary use, but the employer did not first take required actions, including: 29 CFR 1910.134(c)(2)(ii).A written respiratory protection program policy was not developed for voluntary use, respirators. (b Medical evaluations were not conducted. (c employees were not provided the Advisory information in Appendix D of the standard" |
|
| Citation ID |
02002B |
| Citaton Type |
Other |
| Standard Cited |
19100134 E01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-07-23 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employees ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) In the spray booth and finishing areas - Employees who were required to wear half-mask respirators to spray paint and sand wood were not medically evaluated; on or about 02/11/14. |
|
| Citation ID |
02002C |
| Citaton Type |
Other |
| Standard Cited |
19100134 F01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-07-23 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT): (a) In the spray booth and finishing areas - Employees who were required to wear half-mask respirators to spray paint and sand wood were not fit tested; on or about 02/11/14. NOTE: THE EMPLOYER IS REQUIRED TO SUBMIT ABATEMENT CERTIFICATION FOR THIS ITEM IN THE ACCORDANCE WITH 29 CFR 1903.19 |
|
| Citation ID |
02002D |
| Citaton Type |
Other |
| Standard Cited |
19100134 K01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-03-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-07-23 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(k)(1): The employer did not provide effective training to employees who are required to wear respirators in accordance with this paragraph: (a) In the spray booth area and finishing area - Employees who were required to wear half mask respirators to spray paint and sand wood were not provided training; on or about 02/11/14. |
|
| Citation ID |
02003A |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-04-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-07-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) At the worksite - The employer did not maintain a written Hazard Communication Program for chemical such as but not limited to acetone, paint thinner, latex paint, linseed oil, spray paints, denatured alcohol, wood stains and mineral spirits; on or about 02/11/14. |
|
| Citation ID |
02003B |
| Citaton Type |
Other |
| Standard Cited |
19101200 G01 |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-04-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
15 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(g)(1): Employers did not have a safety data sheet in the workplace for each hazardous chemical which they use (a) At the worksite - The employer did not maintain material safety data sheets for hazardous chemicals such as, but not limited to, acetone, paint thinner, latex paint, linseed oil, spray paints, denatured alcoho, wood stainsl and mineral spirits; on or about 02/11/14. |
|
| Citation ID |
02003C |
| Citaton Type |
Other |
| Standard Cited |
19101200 H |
| Issuance Date |
2014-03-04 |
| Abatement Due Date |
2014-04-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2014-03-26 |
| Final Order |
2014-06-23 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(h): Employees were not provided effective information and training as specified in 29 CFR 1910.1200(h)(1) and -2 on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard was introduced into their work area: (a) At the worksite - Employees who used hazardous chemicals such, as but not limited to, acetone, paint thinner, latex paint, linseed oil, spray paints, denatured alcohol, wood stains and mineral spirits; on or about 02/11/14. |
|
