| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2016-04-19
|
| Case Closed |
2017-10-24
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1160642 |
| Safety |
Yes |
|
| Type |
Complaint |
| Activity Nr |
1080348 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100023 C01 |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-09-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: a) Warehouse Area - On or about February 1, 2016, an employee was exposed to fall hazards while conducting maintenance on the bridge girder of the CraneWorks (Serial# 6-180409) R&M (Serial #10794328) gantry crane. The distance from the girder to the floor is approximately 26 feet. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100132 A |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-09-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(a): Protective equipment was not used when necessary whenever hazards capable of causing injury and impairment were encountered: a) Warehouse Area - On or about February 1, 2016, an employee was exposed to fall hazards while conducting maintenance on the bridge girder of the CraneWorks (Serial# 6-180409) R&M (Serial #10794328) gantry crane. The distance from the girder to the floor is 26 feet. An employee climbed over the railings of the man basket to get on the crane girder. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-09-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: a) Warehouse Area - On or about February 1, 2016, the employer did not utilize lockout/tagout procedures when an employee performed maintenance on the CraneWorks (Serial# 6-180409) R&M (Serial #10794328) gantry crane exposing an employee to electric shock, struck-by, and fall hazards of approximately 26 feet. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I B |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-09-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i)(B): Affected employees were not instructed in the purpose and use of the energy control procedure: a) Facility - On or about April 19, 2016, affected employees working in the vicinity of the gantry crane (CraneWorks Serial# 6-180409 R&M Serial #10794328) were not adequately trained in the energy control program for the gantry crane maintenance. These affected employees are exposed to struck by hazards. |
|
| Citation ID |
01004A |
| Citaton Type |
Serious |
| Standard Cited |
19100178 A04 |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2017-11-13 |
| Current Penalty |
2500.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
4 |
| Nr Exposed |
4 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(a)(4): Modifications and additions which affect capacity and safe operation of powered industrial truck were performed by the employer without the manufacturer's prior written approval: a) Warehouse Area - On or prior to April 18, 2016, employees were exposed to struck-by and caught-between hazards due to an employee operating a Komatsu forklift (Model: FG25T-16, Serial # 216482A) with a Vestil Boom (Model: LM-EBT-4-24) attached to the forklift without having the manufacturer's written approval of the use of the this attachment. b) Warehouse Area -On or about February 1, 2016, an employee was exposed to fall hazards due to working on a Safety Cage attachment lifted up approximately 26 feet in height from the ground using the Komatsu forklift (Model: FG25T-16, Serial # 216482A) operated by an employee without having the manufacturer's written approval of the use of this attachment. c) Warehouse Area - On or about March 10, 2016, a contractor employee was exposed to fall hazards due to working on a Safety Cage attachment lifted up approximately 26 feet in height from the ground using the Komatsu forklift (Model: FG25T-16, Serial # 216482A) operated by an employee without having the manufacturer's written approval of the use of this attachment. d) Warehouse Area - On or about May 2, 2016, a contractor employee was exposed to fall hazards due to working on a Safety Cage attachment lifted up approximately 26 feet in height from the ground using the Komatsu forklift (Model: FG25T-16, Serial # 216482A) operated by an employee without having the manufacturer's written approval of the use of this attachment. |
|
| Citation ID |
01004B |
| Citaton Type |
Serious |
| Standard Cited |
19100178 A05 |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2017-11-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
4 |
| Nr Exposed |
4 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(a)(5): The powered industrial truck was equipped with front-end attachments other than factory installed attachments, however the employer did not request that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered: a) Warehouse Area - On or prior to April 18, 2016, employees were exposed to struck-by and caught-between hazards due to an employee operating a Komatsu forklift (Model: FG25T-16, Serial # 216482A) with a Vestil Boom (Model: LM-EBT-4-24) attached to the forklift without requesting that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered. b) Warehouse Area -On or about February 1, 2016, an employee was exposed to fall hazards due to working on a Safety Cage attachment lifted up approximately 26 feet in height from the ground using the Komatsu forklift (Model: FG25T-16, Serial # 216482A) operated by an employee without requesting that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered. c) Warehouse Area - On or about March 10, 2016, a contractor employee was exposed to fall hazards due to working on a Safety Cage attachment lifted up approximately 26 feet in height from the ground using the Komatsu forklift (Model: FG25T-16, Serial # 216482A) operated by an employee without requesting that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered. d) Warehouse Area - On or about May 2, 2016, a contractor employee was exposed to fall hazards due to working on a Safety Cage attachment lifted up approximately 26 feet in height from the ground using the Komatsu forklift (Model: FG25T-16, Serial # 216482A) operated by an employee without requesting that the truck be marked to identify the attachments and show the approximate weight of the truck and attachment combination at maximum elevation with load laterally centered. |
|
| Citation ID |
01005 |
| Citaton Type |
Serious |
| Standard Cited |
19100179 J02 III |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2017-11-13 |
| Current Penalty |
2500.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.179(j)(2)(iii): Monthly inspections of hooks, with a certification record which includes the date of inspection, the signature of the person who performed the inspection and the serial number, or other identifier, of the hook inspected, were not performed: a) Warehouse Area - On or prior to April 19, 2016, the employer was not performing a monthly inspection of a hook on the CraneWorks (Serial# 6-180409) R&M (Serial #10794328) gantry crane. |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 G01 II |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-09-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
2 |
| Nr Exposed |
6 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: a) Warehouse Area - On or about June 1, 2016, an approximately 1,000 pound marble stone slab was stored approximately 19 inches from a 240 Volt electrical panel (Labeled MDP). b) Warehouse Area - on or about June 1, 2016, an approximately 1,000 pound grey marble stone slab was stored approximately 11" from an electrical box (TNT sticker). |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100178 L01 I |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-09-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
9800.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Related Event Code (REC) |
Complaint |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Warehouse Area - On or prior to April 18, 2016, employees operated a Komatsu forklift (Model: FG25T-16, Serial # 216482A) without being adequately trained on the equipment. Precision Marble, Inc. DBA PMI International Stone Importers was previously cited for a violation of this occupational safety and health standard or its equivalent standard, 29 CFR 1910.178(l)(2)(ii), which was contained in OSHA inspection number 952586, citation number 1, item number 1 and was affirmed as a final order on 1/27/14, with respect to a workplace located at 29 Vanderburg Road, Marlboro, NJ 07746. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19100157 G01 |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(g)(1): An educational program was not provided for all employees to familiarize them with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) Facility - On or prior to April 19, 2016, employees were not trained in the use of portable fire extinguishers and the employer did not have a written fire safety policy. |
|
| Citation ID |
03002 |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2016-07-27 |
| Abatement Due Date |
2016-09-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-08-19 |
| Final Order |
2017-09-25 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): Employer had not developed or implemented a written hazard communication program included the requirements outlined in 29 CFR 1910.1200(e)(1)(i) and (e)(1)(ii): a) Facility - On or about April 19, 2016, employees were not trained in hazard communication. Employees work with chemicals such as, but not limited to, propane. |
|
|
