Search icon

BMB CONSTRUCTION CORP.

Company Details

Name: BMB CONSTRUCTION CORP.
Jurisdiction: New York
Legal type: DOMESTIC BUSINESS CORPORATION
Status: Active
Date of registration: 01 Apr 2015 (10 years ago)
Entity Number: 4735932
ZIP code: 11417
County: Queens
Place of Formation: New York
Address: 96-27 ROCKAWAY BLVD., OZONE PARK, NY, United States, 11417

Shares Details

Shares issued 200

Share Par Value 0

Type NO PAR VALUE

DOS Process Agent

Name Role Address
SEGUNDO CUJI DOS Process Agent 96-27 ROCKAWAY BLVD., OZONE PARK, NY, United States, 11417

Filings

Filing Number Date Filed Type Effective Date
150401010375 2015-04-01 CERTIFICATE OF INCORPORATION 2015-04-01

OSHA's Inspections within Industry

Inspection Nr Report ID Date Opened Site Address
343945572 0215000 2019-04-19 827 JEFFERSON AVENUE, BROOKLYN, NY, 11221
Inspection Type FollowUp
Scope Partial
Safety/Health Safety
Close Conference 2019-04-19
Case Closed 2019-06-05

Related Activity

Type Inspection
Activity Nr 1255668
Safety Yes
342556685 0215000 2017-08-16 827 JEFFERSON AVENUE, BROOKLYN, NY, 11221
Inspection Type Planned
Scope Complete
Safety/Health Safety
Close Conference 2017-08-16
Emphasis L: FALL, P: FALL
Case Closed 2023-01-19

Related Activity

Type Inspection
Activity Nr 1255687
Safety Yes

Violation Items

Citation ID 01001
Citaton Type Serious
Standard Cited 19260451 B01
Issuance Date 2017-11-03
Abatement Due Date 2017-11-09
Current Penalty 5070.0
Initial Penalty 5070.0
Final Order 2018-01-29
Nr Instances 1
Nr Exposed 1
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) Location: a) Supported scaffold on the northeast side of the jobsite: On or about 08/16/17, an employee was installing stucco and insulation on the second tier platform of a four-tier-high supported scaffold, erected on top of a shed, that was not fully planked or decked between front upright and the guardrail supports.
Citation ID 01002
Citaton Type Serious
Standard Cited 19260451 G01 VII
Issuance Date 2017-11-03
Abatement Due Date 2017-11-09
Current Penalty 5070.0
Initial Penalty 5070.0
Final Order 2018-01-29
Nr Instances 1
Nr Exposed 1
Gravity 10
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.451(g)(1)(vii): Each employee on a scaffold, not otherwise specified in paragraphs (g)(1)(i) through (g)(1)(vi) of this section, more than 10 feet (3.1 m) above lower level was not protected from falls by the use of personal fall arrest systems or guardrail systems meeting the requirements of paragraph (g)(4) of this section. Location: a) Supported scaffold on the northeast side of the jobsite: On or about 08/16/17, an employee was installing stucco and insulation on the second tier platform of a four-tier-high supported scaffold, erected on top of a shed, and he was exposed to falling approximately 20 feet to the lower level.
340443449 0213100 2015-03-05 1482 ROUTE 9, CLIFTON PARK, NY, 12065
Inspection Type Planned
Scope Complete
Safety/Health Safety
Close Conference 2015-03-05
Emphasis L: FALL, P: FALL
Case Closed 2017-05-22

Violation Items

Citation ID 01001
Citaton Type Serious
Standard Cited 19260020 B02
Issuance Date 2015-03-13
Current Penalty 1700.0
Initial Penalty 1700.0
Final Order 2015-04-09
Nr Instances 1
Nr Exposed 4
Gravity 5
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.20(b)(2): The employer did not initiate and maintain programs which provided for frequent and regular inspections of the job site, materials and equipment to be made by a competent person(s) (a) During framing work: On or prior to 3/05/15, inspections of the jobsite, including tools and equipment, were not conducted by a competent person. Abatement Note: A competent person is one who is capable of recognizing existing and predictable hazards in the surroundings or working conditions which are hazardous, or dangerous to employees, and who has authorization to take prompt corrective action to eliminate them.
Citation ID 01002
Citaton Type Serious
Standard Cited 19260095 A
Issuance Date 2015-03-13
Current Penalty 1020.0
Initial Penalty 1020.0
Final Order 2015-04-09
Nr Instances 1
Nr Exposed 4
Gravity 1
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.95(a): Protective equipment, including personal protective equipment for eyes, face, head, and extremities, protective clothing, respiratory devices, and protective shields and barriers, were not provided: (a) During framing work: On or prior to 3/5/15, protective helmets and protective eyewear were not provided for employee use during framing work, including but not limited to: operation of framing nailers, circular saws, and related tools and equipment.
Citation ID 01003
Citaton Type Serious
Standard Cited 19260404 B01 II
Issuance Date 2015-03-13
Current Penalty 1020.0
Initial Penalty 1020.0
Final Order 2015-04-09
Nr Instances 3
Nr Exposed 4
Gravity 1
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.404(b)(1)(ii): On a construction site, where an assured equipment grounding program was not utilized, all 120-volt, single-phase, 15 and 20 ampere receptacle outlets which were not a part of the permanent wiring of the building or structure and which are in use by employees did not have approved ground fault circuit interrupers for personal protection. (a) During framing work: On or prior to 3/5/15, extension cord set(s) used to power equipment including, but not limited to DeWalt Circular saw(s), a DeWalt 1/2" drill, and a DeWalt sawzall, were not provided with GFCI protection.
Citation ID 01004
Citaton Type Serious
Standard Cited 19261053 B13
Issuance Date 2015-03-13
Current Penalty 1200.0
Initial Penalty 1200.0
Final Order 2015-04-09
Nr Instances 1
Nr Exposed 1
Gravity 1
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.1053(b)(13): The top or step of a stepladder was used as a step: (a) During framing work: On or about 3/5/15, employee was using the top step and/or top of an 8' Werner fiberglass stepladder while nailiing framing member(s) at the front of the building.
Citation ID 02002
Citaton Type Other
Standard Cited 19260403 B02
Issuance Date 2015-03-13
Current Penalty 0.0
Initial Penalty 0.0
Final Order 2015-04-09
Nr Instances 1
Nr Exposed 4
FTA Current Penalty 0.0
Citation text line 29 CFR 1926.403(b)(2): Listed, labeled, or certified equipment was not installed and used in accordance with instructions included in the listing, labeling, or certification: (a) During framing work: On or about 3/05/15, a 6 outlet RPT (relocatable power tap or "power strip") was used to supply power to a small Husky air compressor and several tools, including: 2 DeWalt circular saws, a DeWalt hammer drill, and a DeWalt reciprocating saw (sawzall).
302703103 0214700 2000-06-28 SOUTH SHORE MALL, SUNRISE HWY., BAY SHORE, NY, 11706
Inspection Type Prog Related
Scope Complete
Safety/Health Safety
Close Conference 2000-06-28
Emphasis L: FALL, S: CONSTRUCTION
Case Closed 2001-05-16

Related Activity

Type Inspection
Activity Nr 302703095

Violation Items

Citation ID 01001
Citaton Type Serious
Standard Cited 19260100 A
Issuance Date 2000-07-12
Abatement Due Date 2000-07-17
Current Penalty 525.0
Initial Penalty 750.0
Nr Instances 2
Nr Exposed 2
Gravity 03
Citation ID 01002
Citaton Type Serious
Standard Cited 19260451 B01
Issuance Date 2000-07-12
Abatement Due Date 2000-07-17
Current Penalty 525.0
Initial Penalty 750.0
Nr Instances 1
Nr Exposed 6
Gravity 03
Citation ID 01003
Citaton Type Serious
Standard Cited 19260451 E01
Issuance Date 2000-07-12
Abatement Due Date 2000-07-17
Current Penalty 315.0
Initial Penalty 450.0
Nr Instances 1
Nr Exposed 6
Gravity 01
Citation ID 01004A
Citaton Type Serious
Standard Cited 19260451 C02
Issuance Date 2000-07-12
Abatement Due Date 2000-07-17
Current Penalty 525.0
Initial Penalty 750.0
Nr Instances 6
Nr Exposed 6
Gravity 03
Citation ID 01004B
Citaton Type Serious
Standard Cited 19260452 C03
Issuance Date 2000-07-12
Abatement Due Date 2000-07-17
Nr Instances 1
Nr Exposed 6
Gravity 03
Citation ID 01005
Citaton Type Serious
Standard Cited 19260451 G01 II
Issuance Date 2000-07-12
Abatement Due Date 2000-07-17
Current Penalty 525.0
Initial Penalty 750.0
Nr Instances 1
Nr Exposed 6
Gravity 03
Citation ID 01006
Citaton Type Serious
Standard Cited 19260454 C
Issuance Date 2000-07-12
Abatement Due Date 2000-08-25
Current Penalty 525.0
Initial Penalty 750.0
Nr Instances 6
Nr Exposed 6
Gravity 03

Paycheck Protection Program

Loan Number Loan Funded Date SBA Origination Office Code Loan Delivery Method Borrower Street Address
4266208607 2021-03-18 0235 PPP 821 Cleveland St N/A, West Hempstead, NY, 11552-3611
Loan Status Date 2021-11-23
Loan Status Paid in Full
Loan Maturity in Months 60
SBA Guaranty Percentage 100
Loan Approval Amount (at origination) 6450
Loan Approval Amount (current) 6450
Undisbursed Amount 0
Franchise Name -
Lender Location ID 121536
Servicing Lender Name Customers Bank
Servicing Lender Address 40 General Warren Blvd, Malvern, PA, 19355
Rural or Urban Indicator U
Hubzone N
LMI N
Business Age Description Existing or more than 2 years old
Project Address West Hempstead, NASSAU, NY, 11552-3611
Project Congressional District NY-04
Number of Employees 2
NAICS code 238390
Borrower Race Unanswered
Borrower Ethnicity Unknown/NotStated
Business Type Subchapter S Corporation
Originating Lender ID 121536
Originating Lender Name Customers Bank
Originating Lender Address Malvern, PA
Gender Unanswered
Veteran Unanswered
Forgiveness Amount 6480.04
Forgiveness Paid Date 2021-09-20

Date of last update: 25 Mar 2025

Sources: New York Secretary of State