Inspection Type |
Planned
|
Scope |
Complete
|
Safety/Health |
Safety
|
Close Conference |
2019-11-15
|
Emphasis |
L: FALL, P: FALL
|
Case Closed |
2020-06-26
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19260102 A01 |
Issuance Date |
2020-03-26 |
Current Penalty |
3470.0 |
Initial Penalty |
3470.0 |
Final Order |
2020-05-05 |
Nr Instances |
1 |
Nr Exposed |
2 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.102(a)(1): Eye and face protective equipment were not used when machines or operations presented potential eye or face injury: A) Exterior, In the lift: Employees were exposed to eye/face injuries while using pneumatic nail guns and were not protected with any type of eye/face protection, on or about November 15th, 2019. NOTE: Because abatement of this violation is already documented in the inspection case file, the employer need not submit certification or documentation of abatement for this violation as normally required by 29 CFR 1903.19. |
|
Citation ID |
01002 |
Citaton Type |
Serious |
Standard Cited |
19260453 B02 V |
Issuance Date |
2020-03-26 |
Current Penalty |
2313.0 |
Initial Penalty |
2313.0 |
Final Order |
2020-05-05 |
Nr Instances |
1 |
Nr Exposed |
2 |
Related Event Code (REC) |
Imminent Danger |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.453(b)(2)(v): A body belt with lanyard attached to the boom or basket was not worn by employee(s) working from an aerial lift: A) Building exterior, in lift: Employees were working in a Genie lift and were not tied off. The employees were exposed to fall/catapult hazards of approximately 15 feet, on or about November 15th, 2019. |
|
Citation ID |
01003 |
Citaton Type |
Serious |
Standard Cited |
19260501 B01 |
Issuance Date |
2020-03-26 |
Current Penalty |
3470.0 |
Initial Penalty |
3470.0 |
Final Order |
2020-05-05 |
Nr Instances |
1 |
Nr Exposed |
2 |
Related Event Code (REC) |
Imminent Danger |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.501(b)(1): "Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems. A) Exterior on the roof: Employees were exposed to fall hazards of approximately 15 feet while engaged in roofing/demo work on the roof of a structure without a means of fall protection in place, on or about November 15th, 2019. |
|
|