BUCKEYE CORRUGATED, INC.

Inspection Type	Planned
Scope	Complete
Safety/Health	Safety
Close Conference	2024-08-14
Emphasis	P: AMPUTATE, N: AMPUTATE

Inspection Type	FollowUp
Scope	Partial
Safety/Health	Safety
Close Conference	2018-08-07
Emphasis	N: AMPUTATE
Case Closed	2018-08-07

Related Activity

Type	Inspection
Activity Nr	1301558
Safety	Yes

Inspection Type	Planned
Scope	Complete
Safety/Health	Safety
Close Conference	2018-03-14
Emphasis	N: AMPUTATE, P: AMPUTATE
Case Closed	2018-08-10

Violation Items

Citation ID	01001
Citaton Type	Serious
Standard Cited	5A0001
Issuance Date	2018-04-10
Abatement Due Date	2018-05-14
Current Penalty	3569.0
Initial Penalty	6282.0
Final Order	2018-04-19
Nr Instances	1
Nr Exposed	2
Gravity	5
FTA Current Penalty	0.0
Citation text line	OSH ACT of 1970 Section (5)(a)(1): The employer did not furnish employment and a place of employment which was free from recognized hazards that were causing or likely to cause death or serious physical harm to employees in that employees were exposed to the hazard of being struck by the load should the components of the overhead hoist/gantry crane fail: a) Special Projects Area, on or about 3/14/18: A CM Valustar overhead hoist rated for 1/4 ton was attached to an A Frame gantry crane rated for one ton and no annual inspections of the crane and hoist were not being conducted. Abatement certification must be submitted for these items.
Citation ID	01002A
Citaton Type	Serious
Standard Cited	19100028 B01 I
Issuance Date	2018-04-10
Abatement Due Date	2018-04-20
Current Penalty	3569.0
Initial Penalty	6282.0
Final Order	2018-04-19
Nr Instances	1
Nr Exposed	1
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.28(b)(1)(i): The employer did not ensure that each employee on a walking-working surface with an unprotected side or edge that is 4 feet (1.2m) or more above a lower level was protected from falling by guardrail systems, safety net system, or personal fall arrest system: a) Die Mounter Area, on or about 3/14/18: Scissors lift #9043 was not provided with a midrail at the entrance/exit area. Abatement certification must be submitted for this item.
Citation ID	01002B
Citaton Type	Serious
Standard Cited	19100028 B11 II
Issuance Date	2018-04-10
Abatement Due Date	2018-04-20
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2018-04-19
Nr Instances	2
Nr Exposed	2
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.28(b)(11)(ii): Each flight of stairs having at least 3 treads and at least 4 risers was not equipped with stair rail systems and handrails as required in Table D-2 of this standard: a) Receiving Dock, on or about 3/14/18: A fixed stairway outside the exit door with six risers was not provided with standard stair railings on the right side descending. b) Shipping, on or about 3/14/18: A fixed stairway outside the exit door with six risers was not provided with standard stair railings on the left side descending. Abatement certification must be submitted for these items.
Citation ID	01003
Citaton Type	Serious
Standard Cited	19100212 A01
Issuance Date	2018-04-10
Abatement Due Date	2018-04-20
Current Penalty	4462.0
Initial Penalty	7853.0
Final Order	2018-04-19
Nr Instances	1
Nr Exposed	2
Gravity	5
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Production Floor, on or about 3/14/18: Rotating beater belt on the McKinley 66 inch rotary diecutter was not guarded. Abatement certification must be submitted for this item.
Citation ID	02001
Citaton Type	Other
Standard Cited	19100304 G05
Issuance Date	2018-04-10
Abatement Due Date	2018-04-20
Current Penalty	0.0
Initial Penalty	0.0
Final Order	2018-04-19
Nr Instances	1
Nr Exposed	1
FTA Current Penalty	0.0
Citation text line	29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective: a) Special Projects Area, on or about 3/14/18: Global pedestal fan was not grounded in that the ground pin was missing from the plug end. Abatement certification must be submitted for this item.