|
343317657
|
0215800
|
2018-07-13
|
912 ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Emphasis |
N: AMPUTATE, P: AMPUTATE
|
| Case Closed |
2018-12-07
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2018-10-25 |
| Abatement Due Date |
2018-11-21 |
| Current Penalty |
2217.6 |
| Initial Penalty |
3696.0 |
| Final Order |
2018-11-26 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Sirianni Hardwoods, Inc., on or about 7/13/2018: The employer had not conducted a periodic inspection of their energy control procedures. Authorized employees perform servicing and maintenance activities on equipment including, but not limited to Trimmers, Newman Planners, Cantex Ripsaw, etc., which had multiple energy sources including pneumatic, hydraulic, and electric. |
|
|
|
339239147
|
0215800
|
2013-07-30
|
912 ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2013-07-30
|
| Emphasis |
L: HHHT50, N: SSTARG11
|
| Case Closed |
2013-07-31
|
Related Activity
| Type |
Inspection |
| Activity Nr |
584218 |
| Health |
Yes |
|
|
|
339239014
|
0215800
|
2013-07-30
|
912 ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2013-07-30
|
| Emphasis |
N: SSTARG11
|
| Case Closed |
2013-07-31
|
Related Activity
| Type |
Inspection |
| Activity Nr |
584298 |
| Safety |
Yes |
|
|
|
335842985
|
0215800
|
2012-08-14
|
912 ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2012-08-15
|
| Emphasis |
N: SSTARG11
|
| Case Closed |
2012-12-12
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100023 C01 |
| Issuance Date |
2012-09-25 |
| Current Penalty |
1120.0 |
| Initial Penalty |
1600.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
3 |
| Nr Exposed |
7 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.23(c)(1): Open-sided floor(s) or platform(s) 4 feet or more above the adjacent floor or ground level were not guarded by standard railings (or the equivalent as specified in 29 CFR 1910.23(e)(3)(i) through (v)), on all open sides: a) Trimmer #2, on or about 8/14/12: Open sided floor 4 feet above the next lower level was not provided with a standard railing. b) Stacker, on or about 8/14/12: Open sided floor 4 feet 5-1/2 inches above the next lower level was not provided with a standard railing. c) Outside Exhaust System, on or about 8/14/12: Open sided platform 12 feet 4 inches above the ground was not provided with standard railings on all open sides. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100136 A |
| Issuance Date |
2012-09-25 |
| Current Penalty |
840.0 |
| Initial Penalty |
1200.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.136(a): The employer did not ensure that each affected employee uses protective footwear when working in areas where there is a danger of foot injuries due to falling or rolling objects, or objects piercing the sole, and where such employee's feet are exposed to electrical hazards: a) Trimmer #2, on or about 8/15/12: Employees on the conveyor were not wearing protective footwear while inspecting lumber. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2012-09-25 |
| Abatement Due Date |
2012-10-15 |
| Current Penalty |
1120.0 |
| Initial Penalty |
1600.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Sirianni Hardwoods, Inc., on or about 8/14/12: The employer had not conducted a periodic or more frequent inspection of their energy control procedures. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100147 F03 I |
| Issuance Date |
2012-09-25 |
| Abatement Due Date |
2012-10-15 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(f)(3)(i): A procedure was not utilized to afford the employees a level of protection equivalent to that provided by the implementation of a personal lockout or tagout device when servicing and/or maintenance was performed by a crew, craft: a) Sirianni Hardwoods, Inc., on or about 8/14/12: When servicing and/or maintenance of equipment is conducted by more than one authorized person, group lockout/tagout procedures are not being followed. |
|
| Citation ID |
01004 |
| Citaton Type |
Other |
| Standard Cited |
19100178 L01 I |
| Issuance Date |
2012-09-25 |
| Abatement Due Date |
2012-10-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
1600.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
11 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator was competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): a) Sirianni Hardwoods, Inc., on or about 8/14/12: The Employer did not ensure that each powered industrial truck operator receivied training and evaluation in accordance with paragraph (l). |
|
| Citation ID |
01005A |
| Citaton Type |
Serious |
| Standard Cited |
19100213 H01 |
| Issuance Date |
2012-09-25 |
| Current Penalty |
1400.0 |
| Initial Penalty |
2000.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(h)(1): The sides of the lower exposed portion of the blade of radial saw(s) were not guarded to the full diameter of the blade by a device that automatically adjusted itself to the thickness of the stock and remained in contact with the material: a) Planer Building, on or about 8/14/12: DeWalt Radial Arm saw lower blade was exposed in that the guard on the right side was secured above the blade and could not automatically adjust itself to the thickness of the stock. |
|
| Citation ID |
01005B |
| Citaton Type |
Serious |
| Standard Cited |
19100213 H04 |
| Issuance Date |
2012-09-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(h)(4): Radial saw(s) were not installed in a manner so as to cause the cutting head to return gently to the starting position when released by the operator: a) Planer Building, on or about 8/15/12: DeWalt Radial Arm cutting head did not automatically return to its starting position. |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C03 |
| Issuance Date |
2012-09-25 |
| Current Penalty |
1120.0 |
| Initial Penalty |
1600.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(3): Vertical or inclined shafting seven -7 feet or less from floor or working platform was not enclosed with stationary casing(s): a) Trimmer #2, on or about 8/15/12: Rotating shaft was not fully guarded against contact. |
|
|
|
335842183
|
0215800
|
2012-08-14
|
912 ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
2012-09-07
|
| Emphasis |
L: HHHT50, N: SSTARG11
|
| Case Closed |
2012-11-23
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100095 C01 |
| Issuance Date |
2012-09-25 |
| Abatement Due Date |
2012-12-20 |
| Current Penalty |
1100.0 |
| Initial Penalty |
1600.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
5 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(c)(1): A continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (n) was not instituted when employee noise exposures equaled or exceeded an 8 hour time-weighted average sound level (TWA) of 85 dBA: a) Planer Building, on or about 09/07/12: An employee working as a Machinist was exposed to continuous noise at a level of 81.9% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 81.9% dose is approximately 88.6 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 09/07/12 for 301 minutes. Exposure calculations include a zero increment for the 179 minutes not sampled. Employee was wearing ear plugs. b) Planer Building, on or about 09/07/12: An employee working as a Laborer was exposed to continuous noise at a level of 83.9% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 83.9% dose is approximately 88.7 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 09/07/12 for 305 minutes. Exposure calculations include a zero increment for the 175 minutes not sampled. Employee was wearing ear plugs. c) Planer Building, on or about 09/07/12: An employee working as a Laborer was exposed to continuous noise at a level of 68.5% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 68.5% dose is approximately 87.3 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 09/07/12 for 301 minutes. Exposure calculations include a zero increment for the 179 minutes not sampled. Employee was wearing ear plugs. d) Trim Saw No. 1 Building, on or about 09/07/12: An employee working as a Laborer was exposed to continuous noise at a level of 74.1% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 74.1% dose is approximately 87.8 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 09/07/12 for 298 minutes. Exposure calculations include a zero increment for the 182 minutes not sampled. Employee was wearing ear plugs. e) Trim Saw No. 1 Building, on or about 09/07/12: An employee working as a Lumber Grader/Foreman was exposed to continuous noise at a level of 110.8% of the dose of the OSHA permissible exposure limit. The equivalent dBA for the 110.8% dose is approximately 90.7 dBA calculated as the 8 hour time weighted sound pressure level. The sampling was conducted on 09/07/12 for 304 minutes. Exposure calculations include a zero increment for the 176 minutes not sampled. Employee was wearing ear plugs. Abatement certification must be submitted for this item. Abatement methodology: An effective hearing conservation program in accordance with 29 CFR 1910.95(c) through (n) shall be maintained. An effective hearing conservation program shall include, at a minimum: (1) A baseline audiogram for all employees exposed to noise levels equal to or in excess of the standard. (2) Annual audiograms for each overexposed employee (3) Analysis of audiogram results with retesting and/or referral to an otolaryngologist or qualified physician when a significant threshold shift occurs. A significant shift will be considered to be equal to or greater than an average of 30 dba over the 2000, 3000, and 4000 hertz frequencies. (4) Where insert ear plugs or custom-molded devices are utilized, individual employee fitting shall be conducted by a trained person, and employees shall be instructed in the care and use of the devices. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100095 L01 |
| Issuance Date |
2012-09-25 |
| Abatement Due Date |
2012-10-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(l)(1): A copy of 29 CFR 1910.95 was not made available to affected employees or their representatives nor was a copy posted in the workplace: a) Planer and Trim Saw Areas, on or about 9/7/12: The employer did not provide a copy of 1910.95 to the affected employees, nor post a copy in the workplace, when employees were exposed to noise that exceeded the 8-hour time weighted average of 85 dBA. Abatement certification must be submitted for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100157 G02 |
| Issuance Date |
2012-09-25 |
| Abatement Due Date |
2012-10-25 |
| Current Penalty |
700.0 |
| Initial Penalty |
1020.0 |
| Final Order |
2012-10-16 |
| Nr Instances |
1 |
| Nr Exposed |
25 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(g)(2): The educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting was not provided to all employees upon initial employment, and at least annually thereafter: a) Throughout the facility, on or about 8/14/12: Training was not provided annually to employees on the use of fire extinguishers and the hazards involved with incipient stage fire fighting. Last training conducted was two years ago. * ABATEMENT NOTE: By this date the employer must either correct the alleged violation or implement a Fire Safety Policy; as outlined in 29 CFR 1910.38(a) and .39 which includes the evacuation requirements of 29 CFR 1910.157(b). Abatement certification must be submitted for this item. |
|
|
|
109912055
|
0215800
|
2002-08-13
|
3019 ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
2002-08-21
|
| Emphasis |
L: WOODWORK
|
| Case Closed |
2002-09-26
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100304 F04 |
| Issuance Date |
2002-08-30 |
| Abatement Due Date |
2002-08-28 |
| Current Penalty |
124.15 |
| Initial Penalty |
191.0 |
| Nr Instances |
3 |
| Nr Exposed |
2 |
| Gravity |
01 |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100146 C02 |
| Issuance Date |
2002-08-30 |
| Abatement Due Date |
2002-09-05 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
01 |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2002-08-30 |
| Abatement Due Date |
2002-10-02 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
01 |
|
|
|
304592587
|
0215800
|
2002-08-13
|
3019 ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2002-08-21
|
| Emphasis |
L: FALL, L: WOODWORK, N: AMPUTATE, S: AMPUTATIONS
|
| Case Closed |
2002-09-27
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100023 C01 |
| Issuance Date |
2002-08-30 |
| Abatement Due Date |
2002-09-05 |
| Current Penalty |
195.0 |
| Initial Penalty |
300.0 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
02 |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100265 F03 IC |
| Issuance Date |
2002-08-30 |
| Abatement Due Date |
2002-10-02 |
| Current Penalty |
243.75 |
| Initial Penalty |
375.0 |
| Nr Instances |
3 |
| Nr Exposed |
2 |
| Gravity |
03 |
|
|
|
18155168
|
0215800
|
1992-08-07
|
ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
1992-08-07
|
| Case Closed |
1992-10-09
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100213 G01 |
| Issuance Date |
1992-09-17 |
| Abatement Due Date |
1992-09-22 |
| Current Penalty |
300.0 |
| Initial Penalty |
300.0 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
02 |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 I02 |
| Issuance Date |
1992-09-17 |
| Abatement Due Date |
1992-09-21 |
| Current Penalty |
300.0 |
| Initial Penalty |
300.0 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
02 |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
1992-09-17 |
| Abatement Due Date |
1992-10-20 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
01 |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 |
| Issuance Date |
1992-09-17 |
| Abatement Due Date |
1992-10-20 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| Gravity |
01 |
|
|
|
100529320
|
0215800
|
1987-07-22
|
ADDISON ROAD, PAINTED POST, NY, 14870
|
|
| Inspection Type |
Planned
|
| Scope |
NoInspection
|
| Safety/Health |
Safety
|
| Close Conference |
1987-07-22
|
| Case Closed |
1996-12-31
|
|
