|
341003648
|
0215000
|
2016-02-05
|
901 ELTON ST., BROOKLYN, NY, 11208
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2016-02-05
|
| Case Closed |
2021-09-10
|
Related Activity
| Type |
Referral |
| Activity Nr |
1031113 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
1099994 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C01 |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-06-07 |
| Current Penalty |
5500.0 |
| Initial Penalty |
7000.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of an energy control procedure, employee training and periodic inspections to ensure that before any employee performed any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source and rendered inoperative: Location: ACME Parts, Inc. fabrication On or about 02/05/2016 The employer did not implement a written energy control program consisting of training prior to any servicing or maintenance on machines, such as but not limited to. (a) Employees were repairing the Acme Gridley Machine #604, and did not utilize a energy control program. (b) Employees were repairing the Acme Gridley machine #602, and did not utilize a energy control program. (c) Employees were repairing the Davenport Machine #510, and did not utilize a energy control program. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): The employer did not ensure procedures were developed, documented and utilized for the control of potentially hazardous energy when employees were engaged in activities covered by this section: Location: ACME Parts, Inc. fabrication On or about 02/05/2016 The employer did not implement a written energy control procedure consisting of training prior to any servicing or maintenance on machines, such as but not limited to. (a) Employees were repairing the Acme Gridley Machine #604, and did not implement written energy control procedures. (b) Employees were repairing the Acme Gridley machine #602, and did no implement written energy control procedures. (c) Employees were repairing the Davenport Machine #510, and did not implement written energy control procedures. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C05 I |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(5)(i): The employer did not ensure that locks, tags, chains, wedges, key blocks, adapter pins, self-locking fasteners, or other hardware shall be provided by the employer for isolating, securing or blocking of machines or equipment from energy sources. Location: ACME Parts, Inc. fabrication On or about 02/05/2016 The employer did not provide the hardware necessary to lock out tag out machinery, such as but not limited to. (a) Employees were repairing the ACME Gridley Machine #604, and did not utilize hardware to isolate the energy sources. (b) Employees were repairing the ACME Gridley machine #602, and did not utilize hardware to isolate the energy sources. (c) Employees were repairing the Davenport Machine #510, and did not utilize hardware to isolate the energy sources. |
|
| Citation ID |
01001D |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees Location: ACME Parts, Inc. fabrication On or about 02/05/2016 The employer did not train employees on energy control program requirements prior to any servicing or maintenance on machines, such as but not limited to. (a) Employees were repairing the Acme Gridley Machine #604 and were not trained on the energy control program. (b) Employees were repairing the Acme Gridley machine #602 and were not trained on the energy control program. (c) Employees were repairing the Davenport Machine #510 and were not trained on the energy control program. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
0.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: Location: Acme Parts Inc., Machine Shop On or about: 02/05/2016 a) Employee was working within the point of operation of Swassy Turret lathe machine #4. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
0.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): The point of operation of machines whose operation exposed an employee to injury, was not guarded: Location: ACME Parts Inc. On or about 02/05/2016 a) Employee was using a Warner and Swassy turret machine lathe #4 without a guard in place. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100215 A01 |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
2600.0 |
| Initial Penalty |
3500.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(a)(1): Abrasive wheel used on grinding machinery were not used with safety guard Location: ACME Parts, Inc. Tool Room On or about 02/05/2016 a) Employee was using a surface grinding machine without a guard in place. |
|
| Citation ID |
01005A |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C02 I |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
2600.0 |
| Initial Penalty |
3500.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(2)(i): All exposed part(s) of horizontal shafting seven (7) feet or less from floor or working platform were not protected by stationary casing(s) enclosing shafting completely or by trough(s) enclosing sides and top or sides and bottom of shafting Location: Acme Parts Inc., Machine Shop On or about: 02/05/2016 a) Employee was exposed to the rotational side of the exposed horizontal shaft of the Warner & Swassy turret lathe No. 4. |
|
| Citation ID |
01005B |
| Citaton Type |
Serious |
| Standard Cited |
19100219 C04 II |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(4)(ii): The unused keyway(s) of projecting shaft end(s) were not filled up or covered: Location: Acme Parts Inc., Machine Shop On or about: 02/05/2016 a) Employee was exposed to an unused keyway of the horizontal shaft of the Warner & Swassy turret lathe No. 4. |
|
| Citation ID |
01006 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 D01 |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
2600.0 |
| Initial Penalty |
3500.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(d)(1): Pulley(s) with part(s) seven feet or less from the floor or work platform were not guarded in accordance with the requirements specified in 29 CFR 1910.219(m) and (o): Location: Acme Parts Inc., Machine Shop On or about: 02/05/2016 a) Employee was exposed to the rotating belt of horizontal shaft of the Warner & Swassy turret lathe No. 4. |
|
| Citation ID |
01007 |
| Citaton Type |
Serious |
| Standard Cited |
19100242 B |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
2600.0 |
| Initial Penalty |
3500.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
12 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i Location: Acme Parts Inc. Machine Shop On or about 02/05/2016 a) Employees use compressed air to clean machined shavings and oil off the machined pieces. |
|
| Citation ID |
01008 |
| Citaton Type |
Serious |
| Standard Cited |
19100303 G02 I |
| Issuance Date |
2016-05-18 |
| Abatement Due Date |
2016-05-31 |
| Current Penalty |
2600.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-06-02 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(2)(i): Except as elsewhere required or permitted by Subpart S of Part 1910, live parts of electric equipment operating at 50 volts or more were not guarded against accidental contact by use of approved cabinets or other forms of approved enclosures or by any of the means identified in paragraphs (A), (B), (C), and (D) of 29 CFR 1910.303(g)(2)(i): Location: ACME Parts, Inc. Machine Shop On or about 02/05/2016 (a) Employees were exposed to live parts at 208 volts or more while working on the Davenport Machine #510. Electrical panel door was open, while the employee was working adjacent to live parts. |
|
|
|
340999945
|
0215000
|
2015-10-20
|
901 ELTON ST., BROOKLYN, NY, 11208
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2016-02-05
|
| Emphasis |
N: LEAD
|
| Case Closed |
2021-09-10
|
Related Activity
| Type |
Referral |
| Activity Nr |
1015405 |
| Health |
Yes |
|
| Type |
Inspection |
| Activity Nr |
1100364 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100095 B01 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
2600.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
2 |
| Nr Exposed |
20 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(b)(1): When employees were subjected to sound exceeding those listed in Table G-16, feasible administrative or engineering controls were not utilized: (a) On or about 02/05/2016 at ACME Parts, Inc. operators were exposed to noise hazards where the employer failed to utilize feasible administrative or engineering controls. The following are instances where the time-weighted average exceeded 90 dBA. (1) A machine operator was exposed to 343.4% of the dose, which is equivalent to 98.9 dBA during a period of 379 minutes. Zero exposure was assumed for 101 minutes. (2) A machine operator was exposed to 265.9% of the dose, which is equivalent to 97.0 dBA during a period of 388 minutes. Zero exposure was assumed for 92 minutes. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100095 C01 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
2600.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
23 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program as described in 29 CFR 1910.95(c) through (o), whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level (TWA) of 85 decibels measured on the A scale (slow response) or, equivalently, a dose of fifty percent: (a) On or about 02/05/2016 at ACME Parts, Inc. material handlers and operators were exposed to noise hazards because the employer failed to implement an effective and continuing hearing conservation program. The following are instances where the time-weighted average exceeded 85 dBA: (1) A material handler was exposed to 102.7% of the dose, which is equivalent to 90.1 dBA during a period of 414 minutes. Zero exposure was assumed for 66 minutes. (2) A machine operator was exposed to 346.2% of the dose, which is equivalent to 98.9 dBA during a period of 379 minutes. Zero exposure was assumed for 101 minutes. (3) A machine operator was exposed to 267.1% of the dose, which is equivalent to 97.0 dBA during a period of 388 minutes. Zero exposure was assumed for 92 minutes. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100095 I03 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
23 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(i)(3): Employees were not given the opportunity to select their hearing protectors from a variety of suitable hearing protectors provided by the employer: (a) On or about 02/05/2016 at ACME Parts, Inc. material handlers and operators were exposed to noise hazards. Employees were not given the opportunity to select their hearing protectors from a variety of suitable hearing protectors provided by the employer. The following are instances where the time-weighted average exceeded 85 dBA: (1) A material handler was exposed to 102.7% of the dose, which is equivalent to 90.1 dBA during a period of 414 minutes. Zero exposure was assumed for 66 minutes. (2) A machine operator was exposed to 346.2% of the dose, which is equivalent to 98.9 dBA during a period of 379 minutes. Zero exposure was assumed for 101 minutes. (3) A machine operator was exposed to 267.1% of the dose, which is equivalent to 97.0 dBA during a period of 388 minutes. Zero exposure was assumed for 92 minutes. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100095 I04 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
2600.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
23 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(i)(4): The employer did not provide training in the use and care of all hearing protectors provided to employees: (a) On or about 02/05/2016 at ACME Parts, Inc. material handlers and operators were exposed to noise hazards because the employer did not provide training in the use and care of all hearing protectors provided to employees. The following are instances where the time-weighted average exceeded 85 dBA: (1) A material handler was exposed to 102.7% of the dose, which is equivalent to 90.1 dBA during a period of 414 minutes. Zero exposure was assumed for 66 minutes. (2) A machine operator was exposed to 346.2% of the dose, which is equivalent to 98.9 dBA during a period of 379 minutes. Zero exposure was assumed for 101 minutes. (3) A machine operator was exposed to 267.1% of the dose, which is equivalent to 97.0 dBA during a period of 388 minutes. Zero exposure was assumed for 92 minutes. |
|
| Citation ID |
01003C |
| Citaton Type |
Serious |
| Standard Cited |
19100095 I05 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
3 |
| Nr Exposed |
23 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(i)(5): The employer did not ensure proper initial fitting and supervise the correct use of all hearing protectors: (a) On or about 02/05/2016 at ACME Parts, Inc. material handlers and operators were exposed to noise hazards. The employer did not supervise the correct use of all hearing protectors. The following are instances where the time-weighted average exceeded 85 dBA: (1) A material handler was exposed to 102.7% of the dose, which is equivalent to 90.1 dBA during a period of 414 minutes. Zero exposure was assumed for 66 minutes. (2) A machine operator was exposed to 346.2% of the dose, which is equivalent to 98.9 dBA during a period of 379 minutes. Zero exposure was assumed for 101 minutes. (3) A machine operator was exposed to 267.1% of the dose, which is equivalent to 97.0 dBA during a period of 388 minutes. Zero exposure was assumed for 92 minutes. |
|
| Citation ID |
01004 |
| Citaton Type |
Serious |
| Standard Cited |
19100141 G02 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
2600.0 |
| Initial Penalty |
4900.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.141(g)(2): Employees were permitted to consume food or beverage in area(s) exposed to toxic materials: (a) On or about 10/20/2015 at ACME Parts, Inc. material handlers, set-up men, and operators were exposed to chemical and biological hazards from heavy metals including but not limited to copper. The employer failed to ensure that employees did not consume food and drink in areas with toxic metals. |
|
| Citation ID |
01005 |
| Citaton Type |
Serious |
| Standard Cited |
19101025 H01 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
5500.0 |
| Initial Penalty |
7000.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(h)(1): All surfaces were not maintained as free as practicable of accumulations of lead: (a) On or about 10/20/2015 at ACME Parts, Inc. material handlers, "set-up guys", and operators were exposed to chemical and biological hazards from lead because the employer failed to ensure that surfaces were maintained as free as practicable of accumulations of lead, where employees tooled and handled leaded brass. |
|
| Citation ID |
01006A |
| Citaton Type |
Serious |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
5500.0 |
| Initial Penalty |
7000.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) On or about 10/20/2015 at ACME Parts, Inc. employees were exposed to chemical and biological hazards from lead because the employer failed to implement a written hazard communication program. Employees were exposed to chemicals including but not limited to metalworking fluid and brass, both of which contained lead. |
|
| Citation ID |
01006B |
| Citaton Type |
Serious |
| Standard Cited |
19101200 G01 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(g)(1): The employer did not have a safety data sheet in the workplace for each hazardous chemical which they use (a) On or about 10/20/2015 at ACME Parts, Inc. employees were exposed to chemical and biological hazards from lead because the employer failed to ensure that safety data sheets were made available. Employees were exposed to chemicals including but not limited to metalworking fluid and brass, both of which contained lead. |
|
| Citation ID |
01006C |
| Citaton Type |
Serious |
| Standard Cited |
19101200 H03 II |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(h)(3)(ii): Employee training did not include the physical and health hazards of the chemicals in the work area: (a) On or about 10/20/2015 at ACME Parts, Inc. employees were exposed to chemical and biological hazards from lead because the employer failed to train employees on the hazards of the chemicals in their work area. Employees were exposed to chemicals including but not limited to metalworking fluid and brass, both of which contained lead. |
|
| Citation ID |
02001A |
| Citaton Type |
Willful |
| Standard Cited |
19101025 G01 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
70000.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
2 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(g)(1): Appropriate protective work clothing and equipment were not provided at no cost to the employee when employee(s) were exposed to lead above the permissible exposure limit (PEL), without regard to the use of respirators, or where the possibility of skin or eye irritation exists: (a) On or about 10/20/2015 at ACME Parts, Inc. material handlers were exposed to chemical and biological hazards from lead because the employer failed to provide protective clothing including coveralls or similar full-bodied work clothing, gloves, hats, and face shields. Material handlers handled leaded brass, a process for which there is a potential for skin and eye irritation. (b) On or about 10/20/2015 at ACME Parts, Inc. set-up men and operators were exposed to chemical and biological hazards from lead because the employer failed to provide protective clothing including gloves, safety glasses, hats, and long-sleeve work clothing. Set-up men and operators tooled and handled leaded brass, processes for which there is a potential for skin and eye irritation. |
|
| Citation ID |
02001B |
| Citaton Type |
Willful |
| Standard Cited |
19101025 L01 II |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(l)(1)(ii): The employer did not train each employee who is subject to exposure to lead at or above the action level, or for whom the possibility of skin or eye irritation exists, in accordance with the requirements of 29 CFR 1910.1025: (a) On or about 10/20/2015 at ACME Parts, Inc. material handlers, "set-up guys", and operators were exposed to chemical and biological hazards from lead because the employer failed to train employees with eye and skin exposure to leaded dust and chip on the hazards of lead, where employees tooled and handled leaded brass. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19040032 A01 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
1000.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1904.32(a)(1): At the end of each calendar year the employer did not review its OSHA 300 log to verify that the entries were complete and accurate: (a) On or about 10/20/2015 at ACME Parts, Inc. the employer failed to review, create, certify, and post its 300 log of injury and illnesses. |
|
| Citation ID |
03002 |
| Citaton Type |
Other |
| Standard Cited |
19101025 D02 |
| Issuance Date |
2016-04-19 |
| Abatement Due Date |
2016-05-03 |
| Current Penalty |
100.0 |
| Initial Penalty |
1000.0 |
| Contest Date |
2016-05-10 |
| Final Order |
2017-10-19 |
| Nr Instances |
1 |
| Nr Exposed |
23 |
| Related Event Code (REC) |
Referral |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1025(d)(2): An initial determination was not made to determine if any employee may be exposed to lead at or above the action level: (a) On or about 10/20/2015 at ACME Parts, Inc. material handlers, set-up men, and operators were exposed to chemical and biological hazards from lead because the employer failed to do an initial determination of lead exposure where employees tooled and handled leaded brass. |
|
|
|
114126865
|
0215000
|
1994-05-03
|
883 - 901 ELTON ST., BROOKLYN, NY, 11208
|
|
| Inspection Type |
Planned
|
| Scope |
NoInspection
|
| Safety/Health |
Safety
|
| Case Closed |
1994-05-03
|
|
|
1085307
|
0215000
|
1984-08-29
|
883-901 ELTON ST, BROOKLYN, NY, 11208
|
|
| Inspection Type |
Planned
|
| Scope |
Records
|
| Safety/Health |
Safety
|
| Close Conference |
1984-08-29
|
| Case Closed |
1984-08-30
|
|
